Search Results

25 - 36 of 680 Products for 'Molectron Pm 5200 Power Meter' Page 3 of 57 |
There were no results that contained all of the words in your query. These results contain some of the words.

Molectron Pm 5200 Power Meter

Microsoft Word - AppNote012.doc

Microsoft Word - AppNote012.doc

…every 150 W of power on the
detector surface. To avoid damage to the sensor, the rise in outgoing water temperature should be limited to 15
degrees F. Based on these numbers, the minimum water flow should be 1 GPM per 2500 W. This leads to the
following equation:
Power
Water…

Fabrication and applications of holographic optical filters

Fabrication and applications of holographic optical filters

…the bandwidth and thus increase the maximum optical power for single longitudinal mode operation.
Single mode operation in the wavelength locked range was confirmed by the reading of a wavelength meter
(Coherent Wavemaster, 1 pm resolution).
-2 0 2 4 6 8 10 12 14 16 18
403.073…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Uncertainty ±1% ±1% ±1% ±1%
Calibration Wavelength (nm) 514 514 514 514
Cooling Method Air Air Air Air
Connector Type PM DB-25 PM DB-25 PM DB-25 PM DB-25
Cable Length (m) 2 2 2 2
Part Number 1098350 1098400 1098413 1098341
System
Specifications
49 mm

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

Compact Single Mode Tunable Laser Using a Digital Micromirror Device.pdf

…repeatability
The repeatability of the absolute wavelength after multiple switching events was investigated.
The power of the primary beam was measured by a wavelength meter (Coherent
Wavemaster®) over a 4-second period (the necessary integration time of the instrument).
Then,…

Book.book

Book.book

…output
power of the Coherent CUBE--we recommend two different types
of power meters, that are ideal fits to the Coherent CUBE product
family.
First
Recommendation
We have a great product combination that covers that entire wavelength range at these power levels. The…

FieldMaxII-P User Manual

FieldMaxII-P User Manual


FieldMaxII-P meter. For service information, refer to "Obtaining
Service" (p. 7-3).
WARNING!
Use only the power cord specified for the meter. The grounding
conductor of the cord must be connected to earth ground.
WARNING!
Do not operate the meter if its panels are…

Coherent

Coherent

…(Previously filed as Exhibit 10.2 to
Form 8-K filed on June 5, 2012)
10.16
* Second Lease Amendment by and between Coherent, Inc. and 5200 Patrick Henry
Associates LLC dated as of July 23, 2010. (Previously filed as Exhibit 10.1 to Form 10-Q
for the quarter ended July 3, 2010)…

FieldMate DS 4.qxd

FieldMate DS 4.qxd

…of Coherent's power meter line-up combines both a steady digital display and fast analog meter to provide the most economical way to make power measurements. These small, rugged power meters are ideal for use in the field, and the analog output (0 to 2V) facilitates external power analysis on the…

WP-Meterless-Laser-Power-Energy-Measurement-Simplifies-Embedding.pdf

WP-Meterless-Laser-Power-Energy-Measurement-Simplifies-Embedding.pdf

…and lowers total cost of ownership. Traditional Power and Energy Meters The most common embodiment of laser power and energy measurement instrumentation consists of a sensor head, which connects by a cable to a separate meter. For power sensing, the detector is usually either a thermopile…

COHR SureLock LMseries 0919 5.pdf

COHR SureLock LMseries 0919 5.pdf


40
Output Power (mW)
2 4 6 8
405.0 406.5
0.01
0.1
1.0
405.5 406.0
Log Scale
Operating Time (hours)
0
408.00
408.02
408.04
408.06
408.08
408.10
Wavelength (nm)
2 4 6 8 10
±1 pm
Operating Time…

ThermalSmartSensorAdapterQuickReferenceGuideRevAC.fm

ThermalSmartSensorAdapterQuickReferenceGuideRevAC.fm

…a sensor and a meter.
o
Connect the DB-25 connector on the end of the adapter cable
to the meter.
Connect the adapter to the sensor.
n
n
Apply power to the meter; wait two seconds.
p
Take the measurement and observe the result on the meter
readout.…

UCLD Catalog.book

UCLD Catalog.book

…Upon availability Begin: 9:00 AM End: 5:00 PM
Course Description: The Talisker OEM Course is designed to train students with a theoretical overview, installation with performance verification (pulse energy stability, beam profile, and power measurement), GUI operation, and basic maintenance…

There were no results that contained all of the words in your query. These results contain some of the words.