Search Results

37 - 48 of 973 Products for 'Molectron Pm 5200 Power Meter' Page 4 of 82 |
There were no results that contained all of the words in your query. These results contain some of the words.

Molectron Pm 5200 Power Meter

PowerMax-RS Sensors

PowerMax-RS Sensors

power sensors that Coherent manufactures.
* Displays beam position with position-sensing quadrant thermopiles (with LM-model sensors like LM-10)
* High resolution 24-bit A/D converter supports four digits of resolution and measurement accuracy equivalent to that found in Coherent’s LabMax meters.
*…

Position Sensing Water Cooled Thermopile Sensors 5kW

Position Sensing Water Cooled Thermopile Sensors 5kW

…unique position sensing thermopiles display the position of the incident beam on the sensor disk,in addition to measuring power when used with the LabMax and LabMax-Pro meters. This information allows the user to safely and precisely align the sensor and the beam being measured. This is particularly…

EnergyMax Heat Sink Accessories

EnergyMax Heat Sink Accessories

…and increases the average power handling to 10W to 30W (coating and wavelength dependent).The Large heat sink is for use with 50mm diameter aperture sensors and increases the average power handling to 20W to 40W (coating and wavelength dependent). The average power specification is dependent…

Position Sensing Air-Cooled Thermopile Sensors 200W

Position Sensing Air-Cooled Thermopile Sensors 200W

…position sensing thermopiles display the position of the incident beam on the sensor disk, in addition to measuring power when used with the LabMax and LabMax-Pro meters. This information allows the user to safely and precisely align the sensor and the beam being measured. This is particularly…

Fan-Cooled Thermopile Sensors 300W

Fan-Cooled Thermopile Sensors 300W

…for measurement of laser power up to 300W.

Key Features:
* Fan-cooled
* 100 mW resolution
* 19 mm and 50 mm apertures
* RoHS compliant Contact Us About This Product PRICE HERE Close Fan-Cooled Thermopile Sensors Forced-air, fan-cooled sensors enable measurement of higher powers than passively cooled…

Coherent Family Plan

Coherent Family Plan

…program is available for direct sales between Coherent and end customers (non-OEM), and is good for up to four units (e.g. one meter, two of sensors, and a camera; or two meters and two sensors, etc.). PRICE HERE Close (applicable to direct sales to Coherent customers, limited quantities.) Download…

Air-Cooled Thermopile Sensors 150W (RoHS)

Air-Cooled Thermopile Sensors 150W (RoHS)

…Air-Cooled Thermopile Sensors These air-cooled, surface absorbing sensors are intended for measurement of low to medium power pulsed and CW lasers from the 10 mW to 150W power range. Convection cooling makes them simple to operate as well as mechanically compact. Product numbers ending in “X” are…

High Rep-Rate EnergyMax Sensors

High Rep-Rate EnergyMax Sensors

…Specifically, these heat sinks allow the J-25MT-10KHZ sensor to be used up to 30W average power, and the J-50MT-10KHZ sensor to be used up to 50W average power. The table outlines the average power handling capability when the sensors are used with optional user installable heat sinks. Drawing…

Excimer Laser EnergyMax Sensors

Excimer Laser EnergyMax Sensors

…SSIM, LabMax-TOP, FieldMaxII-TOP and FieldMaxII-P meters. USB and RS232 enabled models are also available. All Excimer sensors accept an optional heatsink, which can be easily attached by the user to extend the maximum energy or average power range. Specifically, these heat sinks allow the…

Multipurpose EnergyMax Sensors

Multipurpose EnergyMax Sensors

meters. USB and RS232 enabled models are also available. The 25 mm and 50 mm diameter sensors accept an optional heatsink, which can be easily attached by the user to extend energy and/or repetition rate range.Specifically, these heat sinks allow 25 mm sensors to be used up to 15 W average power,

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…FieldMaxII-P, EPM1000 and EPM2000 meters. Both sensors accept an optional heatsink, which can be easily attached by the user to extend the maximum energy or average power range. Specifically, these heat sinks allow the J-25MB-IR sensor to be used up to 15 W average power, and the J-50MB-YAG sensor…

Soft carrying cases for FieldMate, FieldMaxII, and LabMax

Soft carrying cases for FieldMate, FieldMaxII, and LabMax

--> Soft Carrying Cases These soft carrying cases fit FieldMate, FieldMaxII, LabMax, LabMax-Pro meters and are also useful for carrying other products like our PowerMax-USB and EnergyMax-USB sensors. Carrying and Storage Cases Soft carrying case for FieldMate.
* 1212401 - Soft Carrying Case for…

There were no results that contained all of the words in your query. These results contain some of the words.

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions