Ask a Question
Coherent
Search Results
1 - 12 of 241 Products for 'Nd Yag Laser' Page 1 of 21 |

Nd Yag Laser

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…the YAG or YLF laser to produce energies per pulse in the joule range at 1-100 Hz. These lasers are often used with nonlinear optical generators that can produce tunable wavelengths in the UV, visible and IR region, enabling time- and wavelength-resolved studies. Nowadays most YAG or YLF lasers

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

laser applications, it is not just laser power that does the work, but power density or beam "brightness". In Depth: Laser Brightness Beam brightness is a commonly used descriptive, non-quantitative term used to describe laser output. In the context of laser technology, the brightness of a laser

Sapphire Lasers

Sapphire Lasers

…footprint compared to (air-cooled) ion lasers
* 532 nm: no green noise, no complex resonator design required, no thermal lensing compared to Nd:YAG/ YVO4lasers
* 561nm: 4x higher efficiency/ less power consumption and heat dissipation than “yellow YAGs”
* Flexible interface concept: analog, RS-232,…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…IR Sensors Very high damage threshold, large area, laser energy sensors optimized for Nd:YAG, Erbium, Ruby and Holmium lasers. Coherent YAG/Harmonics and IR EnergyMax sensors are specifically designed for use with very high energy/peak power lasers operating at low repetition rates, such as those…

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…the YAG or YLF laser to produce energies per pulse in the joule range at 1-100 Hz. These lasers are often used with nonlinear optical generators that can produce tunable wavelengths in the UV, visible and IR region, enabling time- and wavelength-resolved studies. Nowadays most YAG or YLF lasers

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

…Semiconductor Lasers (OPSLs) The OPSL is a diode-pumped laser, but unlike other diode-pumped lasers, the laser medium is a thin semiconductor disk rather than a crystal (see Figure 2). The upper layers of this large area chip are designed to efficiently absorb near-IR pump light (from laser diodes)…

Laser Focus World - January 2015

Laser Focus World - January 2015

…deposition, while the 50 mm-mrad applications typically are brazing, heat treating, and laser metal deposition." Wavelengths in the "9xx" nm wavelength range are slightly shorter than those of traditional 1 µm lasers such as disk, fiber, and Nd:YAG. These shorter wavelengths allow better absorption…

Sapphire Lasers

Sapphire Lasers

…footprint compared to (air-cooled) ion lasers
* 532 nm: no green noise, no complex resonator design required, no thermal lensing compared to Nd:YAG/ YVO4lasers
* 561nm: 4x higher efficiency/ less power consumption and heat dissipation than “yellow YAGs”
* Flexible interface concept: analog, RS-232,…

Excimer laser technology trends

Excimer laser technology trends

…As a matter of fact, a modern excimer laser in a PLD laboratory offers lower running costs at superior performance compared with a crystal and flash-lamp-consuming, frequency-converted Nd : YAG system [7]. 2.2. Energy control and stabilization Excimer lasers for PLD must meet high standards with…

Excimer laser technology trends

Excimer laser technology trends

…As a matter of fact, a modern excimer laser in a PLD laboratory offers lower running costs at superior performance compared with a crystal and flash-lamp-consuming, frequency-converted Nd : YAG system [7]. 2.2. Energy control and stabilization Excimer lasers for PLD must meet high standards with…

2016-Ultrafast-Laser-Systems-Catalog.pdf

2016-Ultrafast-Laser-Systems-Catalog.pdf

lasers for pumping, all Hidra configurations are upgradable to higher performance. Two standard pumping configurations are available: 10 Hz-only or hybrid pumping. In 10 Hz-only pumping, the entire amplifier (regenerative plus multipass) is pumped by a single 10 Hz lamp-pumped Nd:YAG laser. In…

Laser Focus World - January 2015

Laser Focus World - January 2015

…deposition, while the 50 mm-mrad applications typically are brazing, heat treating, and laser metal deposition." Wavelengths in the "9xx" nm wavelength range are slightly shorter than those of traditional 1 µm lasers such as disk, fiber, and Nd:YAG. These shorter wavelengths allow better absorption…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions