Search Results

13 - 24 of 72 Products for 'Nd Yag Laser' Page 2 of 6 |

Nd Yag Laser

LRS EVO

LRS EVO

…pumped laser sources depending on the job requirements. In pulsed mode, the gain medium is pumped in bursts to generate short laser pulses. Power, duration and frequency of the laser pulses are important parameters for material processing. In this mode, the laser medium is a QCW fiber laser source…

Continuous-Wave (CW)

Continuous-Wave (CW)

…Continuous-Wave (CW) Products Diode-Pumped Solid-State Lasers or DPSS Lasers Diode-Pumped Solid-State Lasers or DPSS Lasers The Coherent diode-pumped solid-state (DPSS) lasers portfolio includes pulsed and short-pulsed Q-switched, mode-locked, and CW lasers that enable a wide range of applications…

LaserCam HR-InGaAs

LaserCam HR-InGaAs

…capture when the laser is fired after an external trigger signal that is shorter than the default camera trigger delay. Depending on the default trigger delay of the camera (150 µsec for the CMOS camera types and 20 µsec for the InGaAs LaserCam-HR) and the repetition rate of the laser, the trigger…

High Power Water-Cooled Thermopile Sensors to 5kW

High Power Water-Cooled Thermopile Sensors to 5kW

lasers at power levels up to 5 kW.

Key Features:
* Water-cooled
* 1W resolution
* 50 mm aperture
* RoHS compliant Water-cooling and careful thermal management within these sensors enable them to deliver kW level power handling capacity. They can capably measure industrial CO2 and Nd:YAG lasers at…

High Peak Power Thermopile Sensors

High Peak Power Thermopile Sensors

…for use with pulsed high-peak-power, low repetition rate, Q-switched Nd:YAG lasers. A volume-absorbing substrate mounted in front of the detector absorbs the bulk of the laser energy, thus preventing all of the laser energy from striking the front surface of the detector element. These sensors…

Position Sensing Water Cooled Thermopile Sensors 5kW

Position Sensing Water Cooled Thermopile Sensors 5kW

…0.25 to 10.6 µm spectral range
* Compact water-cooled design
* Large 38 mm or 55 mm diameter aperture
* Excellent for high-power CO2 and Nd:YAG lasers
* RoHS Compliant Contact Us About This Product PRICE HERE Close Overview These unique position sensing thermopiles display the position of the…

Prometheus

Prometheus

…Family of ultra-narrow linewidth (~1 kHz) frequency-tunable CW lasers with both 532 nm and 1064 nm wavelengths in a single package. Contact Us About This Product Close PRICE HERE Ultra-Narrow Linewidth CW DPSS Green Laser Prometheus laser, as the whole Mephisto family, is based on a Non-Planar Ring…

KLS

KLS

…the KLS laser series can be used in particular for fine cutting, drilling, scribing, and precision welding as well as for multiple applications. With the modular structure, 6 different designs are available. Contact Us About This Product Close PRICE HERE pulsed Nd:YAG laser Typical applications…

Excimer laser technology trends

Excimer laser technology trends

…fact, a modern excimer laser in a PLD laboratory
offers lower running costs at superior performance compared
with a crystal and flash-lamp-consuming, frequency-converted
Nd : YAG system [7].
2.2. Energy control and stabilization
Excimer lasers for PLD must meet high…

SST 2017-09 Laser Marking.pdf

SST 2017-09 Laser Marking.pdf

…and ideally, the laser marker should have the
capability to adjust the focus of the laser beam onto the
ceramic surface in real time, in order to compensate
for package height variations. Because of their more
reliable interaction with ceramic materials, DPSS lasers
based on…

Laser Focus World - January 2015

Laser Focus World - January 2015

…while the 50 mm-mrad applications typically are brazing, heat
treating, and laser metal deposition."
Wavelengths in the "9xx" nm wavelength range are slightly shorter than
those of traditional 1 µm lasers such as
disk, fiber, and Nd:YAG. These shorter wavelengths allow better…

Industrial Laser Solutions - March/April 2016

Industrial Laser Solutions - March/April 2016

…fiber) means these lasers are not field-serviceable. So, if any
components are even slightly damaged, the entire laser must
be shipped back to the factory and replaced.
Coherent's novel modular approach to fiber laser design is
based on the use of diode laser bars, rather than…