Search Results

Refine

Result Type

1 - 12 of 37 Products for 'Nitrogen' Page 1 of 4 |
Related Categories: Corrosion Inhibitor | Rj45

Nitrogen

MetaBEAM1000c Pre.book

MetaBEAM1000c Pre.book

Site Preparation
1 - 13
Nitrogen is also used to purge the laser of the LMT system. No other
gas should be used in place of Nitrogen.
DANGER!
No other gas should be used in place of Nitrogen to purge the
laser of the LMT system. Using other gases may result in a fire.…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…thereby lead to
possible tube failure.
Nitrogen Purge Innova Sabre MotoFreD ion laser operation in SHG wavelengths
requires a source of high purity nitrogen gas. The end user must
supply a grade 5 (99.999%) quality or better. Nitrogen boil-off is
recommended. A regulator…

00 Sabre Preinstall.book

00 Sabre Preinstall.book

…parts. A
user-supplied source of dry nitrogen is required on purged systems.
The recommended grade of bottled nitrogen has a minimum purity
of 99.999% and is sometimes known as scientific grade. A high
purity "boil-off" nitrogen source may be used as an alternative. Dry

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…and
associated matching network components. Only nitrogen as
described above or compressed air as described below should be
used as a purge gas.
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, the alternative is clean, dry, oil-free…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…gases will result in damage to the RF laser head. Only
nitrogen as described above or compressed air as described
below should be used as a purge gas.
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, the alternative is clean, dry, oil-free…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…power module and
associated matching network components. Only nitrogen or
compressed air as described below should be used as a purge
gas.
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, the alternative is clean, dry, oil-free

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-3-5 Series OEM Lasers Preinstallation Manual
3 - 14
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, clean, dry, oil-free compressed air is an
acceptable alternative. Compressed air is available in many facilities
but typically…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…power module and
associated matching network components. Only nitrogen or
compressed air as described below should be used as a purge
gas.
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, the alternative is clean, dry, oil-free

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…from this aperture.
Nitrogen Purge Provides for the mandatory gas purge of the beam conditioning optics. Requires
1/4 inch (6.3 mm) OD Teflon, polyethylene or polypropylene tubing.
Standard gas fitting for purging the optics in the laser head. Nitrogen is not
required for tube…

00 E-250 Pre.book

00 E-250 Pre.book

…Requirements and System Installation
3 - 13
NOTICE!
It is the responsibility of the customer to provide purge gas of
either nitrogen or compressed air that meets the specifications
stated above, and clean flexible tubing to carry the purge gas.
Failure to comply with…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Operator's Manual
3 - 12
Guidelines for Use of
Compressed Air for
Purge
If nitrogen is not available, the alternative is clean, dry, oil-free
compressed air. Compressed air is available in many facilities but
typically is contaminated…

book.book

book.book

…grating.
If your laser has a diffraction grating, use only a sterile jet of nitrogen or air to clean
the surface of the grating.
CAUTION!
Do not touch the laser with any cleaning products other than a sterile jet of
nitrogen or air to clean a diffraction grating!