Search Results

1 - 12 of 20 Products for 'Not Modelocking' Page 1 of 2 |

Not Modelocking

Quick Setup.fm

Quick Setup.fm

…Vitesse head. Switch the P/S key from
"Standby" to "ON" and press the "Shutter Open" button. The system should modelock with
in 10 minutes. If the system does not modelock, or if a fault message is displayed, refer to
Section Five of the Operator's manual.
Copyright© Coherent…

Paladin Advanced 355

Paladin Advanced 355

…Quasi-CW modelocked UV lasers, ranging from 8 W to 24 W. Quasi-CW UV lasers of high power: 8W, 10W, 16W and 24 W. Especially the 16 W and 24 W versions give access to applications and process speeds which were impossible in the past. Contact Us About This Product Close PRICE HERE Modelocked UV Laser…

Paladin Advanced 532

Paladin Advanced 532

--> Paladin Advanced 532 Modelocked high-power, green laser, 20 W at 532 nm. Ideal for pumping OPOs. Contact Us About This Product Close PRICE HERE Mode Locked Laser Paladin Advanced 532 is ideal for the pumping of OPOs, enabling wide tuning-ranges and high-average powers of the OPO output. The 20W…

Mira brochure

Mira brochure

…convenient,
external adjustment of the intracavity slit. The
CW detector is also used to drive the automated
starting of the modelocking process.
Not only that, but by using a sensitive device
for monitoring power, Mira can easily detect the
relative laser output power…

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…other neodymium crystal hosts lend themselves to operation in CW, Q-switched and mode-locked operations, laser diodes, OPSL and ion lasers
do not support Q-switched operation and are virtually not used in mode-locked regime.
At longer wavelengths, carbon dioxide lasers, which use plasma…

UCLD Catalog.book

UCLD Catalog.book

…The course typically does not
include the pump laser.
Key Topics: Laser and electrical safety; review of specifications and typical operating conditions; laser basics;
theory of operation including the concept of dispersion compensation and modelocking; review of optical beam

GUI 3.88 Revision History.pdf

GUI 3.88 Revision History.pdf

…such document, also removed the
developer names from the about tab
Monaco:#779 - Subtract the offset from PD4V while calculating the modelocking window
width
Monaco:#810 - Added an optimizer for STRT
Allowed retires up to 10000000 in the HyperNX SequenceForm, also switched…

Laser Focus World - May 2015

Laser Focus World - May 2015

…Dye gain medium Solid-state gain medium Pumped by solid-state lasers Pumped by diodes Semiconductor mode-locking Fiber gain medium 200 k 100 k Active mode-locking Passive free space mode-locking May 2015 www.laserfocusworld.com Laser Focus World 42 photonicsproducts U L T R A F A S T S C I E N T…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…(REGN)
· Stretcher/Compressor
The Coherent VitaraTM serves as the seed laser for the Astrella
system. This module includes a modelocked Ti:Sapphire oscillator
cavity pumped by the Coherent VerdiTM G-Series, a continuous-wave diode-pumped green laser.
The Revolution is…

COHR ChameleonVision-S DS 0517 3.pdf

COHR ChameleonVision-S DS 0517 3.pdf

Widely Tunable, High Peak Power, Single Box Precompensation, Hands-Free, Modelocked Ti:S Laser The Chameleon Vision-S is purpose designed for applications in two photon microscopy where having the shortest pulses is paramount to ensure optimum image brightness when working with thermally sensitive…

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

…(REGN)
· Stretcher/Compressor
The Coherent VitaraTM serves as the seed laser for the Astrella
system. This module includes a modelocked Ti:Sapphire oscillator
cavity pumped by the Coherent VerdiTM G-Series, a continuous-wave diode-pumped green laser.
The Revolution is…

Chameleon Reliability Antarctia Final WP.pdf

Chameleon Reliability Antarctia Final WP.pdf

…unpleasant 40oC due to the heat generated by all the
lab equipment but the laser continued to work.
However, some of the other equipment could not be
successfully operated at this high temperature so the
decision was made to open a window in order to
decrease the temperature…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions