Search Results

1 - 12 of 152 Products for 'Ns' Page 1 of 13 |

Ns

Synchrolock-AP

Synchrolock-AP

…actuators provide jitter stabilization over a broad bandwidth and large dynamic range
* User adjustable delay between locked pulse trains of up to 13 ns with around 22 fs resolution (for a 76 MHz cavity)
* Simple fiberoptic coupling of slave output beam to the Synchrolock-AP detection system results…

HELIOS

HELIOS

…<0.79 ns <0.69 ns <0.95 ns <0.69 ns <0.85 ns Spatial Mode TEM 00 (M 2 < 1.25) Beam Diameter (Gaussian Fit, 1/e2) 3.5 mm 2.5 mm 2 mm Polarization Linear Jitter (between sequential pulses, gating mode) < ±2 ns Jitter (trigger to laser pulse, single pulse triggering) < ±2 ns < ±5 ns < ±2 ns < ±5 ns

FLARE NX Short-Pulsed DPSS Lasers

FLARE NX Short-Pulsed DPSS Lasers

…Close PRICE HERE Short-Pulsed Diode-Pumped Solid-State Lasers Available in wavelengths from UV to IR, the FLARE NX offers short-pulse durations of ~1 ns, high repetition-rates up to 2 kHz, and high pulse energies up to 500 µJ. The solid-state technology guarantees longer lifetimes than gas lasers;…

QCR Fiber Optic Cable

QCR Fiber Optic Cable

…8 mm (single-mode) 10 mm (multi-mode) Max Power (CW) 750 W Max Peak power 2.5 kW at 10 ms pulse length 12.5 kW at 1 ms pulse length 250 kW at 50 ns pulse length Transmission losses < 3%, typical 1% Compatible interface Ø 30 mm Features & Benefits
* Quartz block
* Mode stripper
* Suitable for…

QD Fiber Optic Cable

QD Fiber Optic Cable

…µm Length 5-200 m Numerical aperture 0.20 Max Power (CW) 20 kW Max Peak power 10 kW at 10 ms pulse length 50 kW at 1 ms pulse length 1 MW at 50 ns pulse length Transmission losses < 3%, typical 1% Power loss capability in the connector 2 kW for 10 s 1 kW for 10 min 0.5 kW continuously Compatible…

RQB Fiber Optic Cable

RQB Fiber Optic Cable

…Power (CW) @1064nm 1.5 kW 3.0 kW (with external cooler) Max Peak power @1064nm 10 kW at 10 ms pulse length 50 kW at 1 ms pulse length 1 MW at 50 ns pulse length Transmission losses < 3%, typical 1% Power loss capability in the connector Max. 100 W for 10 s Max. 50 W for 1 min Max. 10 W continuously…

HyperRapid NX/NXT - Industrial Picosecond Laser

HyperRapid NX/NXT - Industrial Picosecond Laser

…can be triggered on-demand with low jitter (<25 ns) and trigger-to-pulse delay. The fast process shutter allows both on/off control and energy attenuation for each individual pulse. Burst mode can be selected to determine how many 10 ps-pulses with 25 ns separation should be released in an envelope.…

DIAMOND C-Series

DIAMOND C-Series

…superior pulse control and extremely fast pulse fall times. The Cx-10LDE+ provides <1 µs fall times and the Cx-10LQS delivers high peak power with ≤200 ns pulse widths. The C-55 and C-70 lasers, are specified at 55W and 70W output, respectively, and are available as either air-cooled or water-cooled…

AVIA LX 355-20 Laser

AVIA LX 355-20 Laser

…laser offers 20W @ 355nm at a game-changing price point. The AVIA LX closes the gap between the MATRIX series and the AVIA NX series of diode-pumped ns UV lasers for material processing. It shares the genes for best performance in highly demanding industrial applications utilizing a new robust,…

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

…Power Density (kW/cm²) 14 14 14 14 14 14 50 (1ms; 1064 nm) Maximum Energy Density (J/cm²) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 33 (10 ns; 1064 nm) 30 (3 ms; 755 nm) Rise & Fall Time (μs) ≤10 ≤350 ≤10 ≤350 ≤50 ≤50 ≤10 Detector Coating…

Diode-Pumped Solid-State or DPSS Lasers

Diode-Pumped Solid-State or DPSS Lasers

--> Diode-Pumped Solid-State Lasers or DPSS Lasers Solid-state lasers in IR, Green, and UV wavelengths offering ns, ps, fs pulses and powers up to 100 watts The Coherent diode-pumped solid-state (DPSS) portfolio includes pulsed and short-pulsed Q-switched, mode-locked, and CW lasers that enable a…

Solar Cell Manufacturing

Solar Cell Manufacturing

--> c-Si Solar Cell Edge Isolation - Laser process tools enable ultra-narrow c-Si solar cell line scribing for edge isolation while minimizing sub-surface damages such as microcracking. Laser process tools for solar cell Edge Isolation all feature AVIA lasers; currently the dominant laser source for…