Search Results

Refine

Result Type

1 - 12 of 12 Products for 'Obis Lx Manual' Page 1 of 1 |
  • 1

Obis Lx Manual

COHR OBISfamily DS 0818 8.pdf

COHR OBISfamily DS 0818 8.pdf


10 to 50
-20 to 60
Shock Tolerance (g) (6 ms) 30 30 30 30 30
1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 520LX with a 520 nm to 530 nm range; 640LX with 635 nm to…

COHR OBIS SingleLaserRemote DS 0317 1.pdf

COHR OBIS SingleLaserRemote DS 0317 1.pdf

…to 5V
Digital Modulation Input2 SMB, 50 Ohm, 0 to 3V
Warm-up Time (minutes) (from cold start) <2
OBIS Connection Software3 Included on USB drive with user manual
Power Consumption (W) (typical) 1 (laser not included)
Power Consumption (W) (maximum) 2 (laser not included)…

OBIS-Single-Laser-Remote-Data-Sheet.pdf

OBIS-Single-Laser-Remote-Data-Sheet.pdf

…0 to 5V
Digital Modulation Input2 SMB, 50 Ohm, 0 to 3V
Warm-up Time (minutes)(from cold start) <2
OBIS Connection Software3 Included on USB drive with user manual
Power Consumption (W)(typical) 1 (laser not included)
Power Consumption (W)(maximum) 2 (laser not included)…

OBIS LaserSafety Installation QSG 11-85-44 9 RevAF COVERS.fm

OBIS LaserSafety Installation QSG 11-85-44 9 RevAF COVERS.fm

…how to get the OBIS laser up and
running in CW mode without a Remote box. For more
information--including specifics about modulation,
interfacing, installation, heatsinking, and packaging--
refer to the Coherent OBIS LX/LS Operator's Manual
(1184163). The manual is available…

COHR OBIS LaserBox DS 0618 1.pdf

COHR OBIS LaserBox DS 0618 1.pdf

…at 10A maximum, Molex P/N 43025-0600 for mating connector
Power Cord (USA) 2.4m (8 ft.)
Operating Condition5 (°C) 10 to 40 for OBIS LX, 10 to 35 for OBIS LS
Non-operating Condition5 (°C) -10 to 60
Shock Tolerance (g) (6 ms) 20
Operating Voltage (VAC) 90 to 264, 47 to 63 Hz…

COHR OBIS ScientificRemote DS 0317 1.pdf

COHR OBIS ScientificRemote DS 0317 1.pdf

…5V
Digital Modulation Input3 SMB, 50 Ohm, 0 to 3V
Warm-up Time (minutes) (from cold start) <2
OBIS Connection Software2 Included on USB drive with user manual
UTILITY AND ENVIRONMENTAL REQUIREMENTS
Power Consumption (W) (typical) 5 (without lasers)
Power Consumption…

COHR OBISfamily DS 0719 2.pdf

COHR OBISfamily DS 0719 2.pdf


10 to 50
-20 to 60
Shock Tolerance (g) (6 ms) 30 30 30 30 30
1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 520LX with a 520 nm to 530 nm range; 640LX with 635 nm to…

COHR OBISfamily DS 0119 3.pdf

COHR OBISfamily DS 0119 3.pdf


10 to 50
-20 to 60
Shock Tolerance (g) (6 ms) 30 30 30 30 30
1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 520LX with a 520 nm to 530 nm range; 640LX with 635 nm to…

COHR OBISfamily DS 1219 3.pdf

COHR OBISfamily DS 1219 3.pdf

…60
10 to 50
-20 to 60
Shock Tolerance (g) (6 ms) 30 30 30 30 30
1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range; 520LX with a 520 nm to 530 nm range; 633LX with 629-636;…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…to 60 -20 to 60 -20 to 60 -20 to 60
Shock Tolerance (g)(6 ms) 30 30 30 30
1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX
with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635…

book.book

book.book

StingRay/BioRay Lasers Operator's Manual
6 - 4
Heat Sink Mount: Separate Driver (SD)
A compact Heat Sink Mount (P/N 1264007) shown in Figure 6-7 is available. This
mount is used when ordering a StingRay "Separate Driver (SD)" laser configuration.
Figure 6-8 shows the…

COHR CUBE DS 0818 4.pdf

COHR CUBE DS 0818 4.pdf

OBIS LX/LS Datasheet
CUBE
ACCESSORIES
1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm
1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable.
1072166 CUBE Interface Cable1 CUBE to control box, I/O, RS-232, and power…