Search Results

Refine

Result Type

1 - 12 of 16 Products for 'Operator's Manual For Sapphire' Page 1 of 2 |

Operator's Manual For Sapphire

Book.book

Book.book

…output.
?LT Laser Type N/A When OP=2 operating mode is active, this
query returns Sapphire laser types. Review the
Sapphire manual for additional information.
OP
*
*
*Operating

Protocol
1,2,3 Determines the response format for
commands and queries. OP=1 returns data…

COHR SapphireLP DS 1017 1.pdf

COHR SapphireLP DS 1017 1.pdf

Sapphire LP Datasheet
SPECIFICATIONS Sapphire Sapphire
458 LP 488 LP
Wavelength1 (nm) 458 ±2 488 ±2
Output Power2 (mW) 20, 50, 75 10, 20, 25, 30, 40, 50,
75, 100, 150, 200, 300
Spatial Mode TEM00, M2 <1.1
Beam Asymmetry 0.9 to 1.1
Beam Diameter at 1/e2…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…to protect the laser from operation with inappropriate bandwidth from the seed laser.
Power Supplies The Astrella system includes two individual power supplies for the
Vitara and Revolution modules. Refer to the Vitara and Revolution
Operator's Manuals for additional information.

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

…to protect the laser from operation with inappropriate bandwidth from the seed laser.
Power Supplies The Astrella system includes two individual power supplies for the
Vitara and Revolution modules. Refer to the Vitara and Revolution
Operator's Manuals for additional information.

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…or other adequate heat sink.
7 Sapphire 488-10/20/25/30 has a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW
models are limited to a maximum baseplate temperature of +50°C (+122°F).
Sapphire LP
CW Visible Lasers from Deep Blue…

COHR SapphireLP DS 1119 1.pdf

COHR SapphireLP DS 1119 1.pdf

Sapphire LP Datasheet
SPECIFICATIONS Sapphire
458 LP
Sapphire
488 LP
Wavelength1 (nm) 458 ±2 488 ±2
Output Power2 (mW) 20, 50, 75 10, 20, 25, 30, 40, 50, 75, 100, 150, 200,
300
Spatial Mode TEM00, M2 <1.1
Beam Asymmetry 0.9 to 1.1
Beam Diameter at…

Libra PreInstallation.book

Libra PreInstallation.book

…second-harmonic Q-switched
laser. Operating at 527 nm and a single-kHz repetition rate, it
provides the pump power to the amplifier module. The Vitesse and
Evolution are described in detail in their respective Operator's
Manuals.
The Regenerative Amplifier is based…

00 Legend Elite Preinstallation.book

00 Legend Elite Preinstallation.book

…the Operator's Manual carefully before operating the
laser for the first time. Special attention must be given to the
material in Section One: Laser Safety.
Use of controls or adjustments or performance of procedures
other than those specified in this Operator's Manual may result…

COHR SapphireSF DS 0719 3.pdf

COHR SapphireSF DS 0719 3.pdf

…0.3 kg (0.66 lbs.)
Sapphire SF Datasheet
1 Measured in air.
2 Laser-to-laser tolerance and wavelength tolerance over guaranteed lifetime.
3 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
4 Single-mode,…

COHR SapphireSF DS 0819 1.pdf

COHR SapphireSF DS 0819 1.pdf

…0.3 kg (0.66 lbs.)
Sapphire SF NX Datasheet
1 Measured in air.
2 Laser-to-laser tolerance and wavelength tolerance over guaranteed lifetime.
3 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
4 Single-mode,…

COHR SapphireSF DS 1119 1.pdf

COHR SapphireSF DS 1119 1.pdf

…0.3 kg (0.66 lbs.)
Sapphire SF NX Datasheet
1 Measured in air.
2 Laser-to-laser tolerance and wavelength tolerance over guaranteed lifetime.
3 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
4 Single-mode,…

COHR SapphireSF DS 1017 1.pdf

COHR SapphireSF DS 1017 1.pdf

Sapphire SF Datasheet
SPECIFICATIONS Sapphire 488 SF Sapphire 532 SF
Wavelength (nm) 488 532
Wavelength Accuracy (nm) 0.1
Single-longitudinal Mode, Linewidth (MHz) <1.5
Output Power1 (mW) 20, 50, 100 20, 50, 100, 150
Spatial Mode
TEM00, M2 <1.1, single…