900-P fold mirror M10
Fast photodiode sync
Saturable absorber aperture with
width and translation controls
X, Y and length control of
output coupler mirror M1
The inside story of productive work.
Mira was expressly…
--> Fiber-to-Fiber Coupler Water-cooled The Fiber to Fiber Coupler (FFC wc) connects a laser beam from one fiber optic cable to another. The FFC wc is an eye-safe stand-alone unit with one fiber input and one fiber output. The FFC wc is water-cooled to handle high power levels (up to 12 kW). The FFC…
…The long-radius output coupler acts as a weak lens to transfer the output-beam parameters. The values listed for beam divergence, beam waist diameter and beam waist location take into account the weak lens effect. The value for beam waist location is measured from the output coupler toward the high…
…output bezel. 6 Beam diameter measured at 1/e2 points at the output coupler. 7Full-angle measurement. 8Performance in light regulation with PowerTrack™ over a 30-minute period following a one-hour warm-up. A Deep and Agile Ion Laser - In applications requiring deep-UV, the qualities of the output…
…configurations, with output wavelengths from the ultraviolet to the infrared. Contact Us About This Product Close PRICE HERE INNOVA 70C Key Attributes:
* Multiline output power to 5W
* Most compact laser head in the Innova series
* Fast warm-up
* Most cost-effective solution for cw output in the…
…Optics Products Fiber-to-Fiber Coupler Air-cooled Fiber-to-Fiber Coupler Air-cooled The Fiber to Fiber Coupler air-cooled (FFC ac) has a power handling capacity of 4.5 kW. Fiber-to-Fiber Coupler Water-cooled Fiber-to-Fiber Coupler Water-cooled The Fiber to Fiber Coupler (FFC wc) connects a laser…
other laser parameters can be found at www.coherent.com.
Figure 2-2. Verdi G-Series Laser Head Optical Schematic.
Temperature Stabilization Module
VCR Upgrade Kit (VCR gas connections instead of Gyrolok)
Pre-mounted Output Coupler for quick optics exchange, COMPex 100/200
Pre-mounted Rear Mirror for quick optics change, 248 nm
Low-Divergence Optics, 248 nm,…
…limiting cases below. An
example of the effect of repositioning is shown in Figure 3-5
(p. 3-15). Here the distance between the HeNe output coupler plane
(where the waist is located) and the ModeMaster PC reference plane
B is varied (first column). The Rayleigh range ZR1 for this…
…the anode window to
enhance mode quality and reduce maintenance on the optics. Additionally, advanced
optical coatings mean the output coupler
never needs changing.
With Excellent Stability.
Applications such as laser-induced
…polarization to p that is transmitted through the PBS and focused into the laser
diode. The output coupler of the cavity is the VHG. The undiffracted beam, i.e zero order, is
the output beam of the cavity. This resonant cavity is self-aligned because it is independent of
…UV, 351.1 and 363.8 nm. 5 Beam parameter values typical. 6Beam diameter measured at 1/e2 points 1.0 meter from output bezel. 7 Beam diameter measured at 1/e2 points, at the output coupler. 8Full-angle measurement. 9Performance in light regulation with PowerTrackTM over a 30-minute period following a…
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.