Search Results

1 - 12 of 99 Products for 'Picosecond Laser' Page 1 of 9 |

Picosecond Laser

Picosecond Lasers

Picosecond Lasers

…- .Picosecond laser system that is cost-effective and fit for demanding industrial applications. Rapid NX delivers 7W and 1 MHz at 1064 nm.
* HYPER RAPID - Family of HyperRapid picosecond lasers offers performance at 50 W and 100 W at 1064 nm and 1000 kHz.
* HELIOS - Family of picosecond lasers with…

Related Products: 1064 Q Switch | 1064 Laser Diode | Hyperrapid Nx

Industrial Short-Pulse Lasers

Industrial Short-Pulse Lasers

…Ultra Short-Pulse Lasers The industrial ultra short-pulse diode-pumped lasers include femtosecond lasers with up to 900 fs pulse widths and picosecond lasers with up to 80 MHz repetition rates. Femtosecond Lasers - The ultrafast pulses delivered by femtosecond lasers enable the most demanding,…

Related Products: Rapid Nx | Industrial Picosecond Lasers | 532 Nm Laser

HELIOS

HELIOS

…HELIOS lasers, in the IR and the Green, allow for picosecond precision in a variety of micromachining and microelectronics applications. The high peak power from pulse durations as low as a few hundred picoseconds allows HELIOS to deliver an effective number of photons to the sample. The laser pulse…

Related Products: Helios 1064 | Helios | Pulsed Uv Laser

Industrial Picosecond

Industrial Picosecond

…All Industrial Picosecond Products HYPER RAPID HYPER RAPID This family of picosecond lasers consists of a 50 W and 100 W models offered at 1064 nm and 1000 kHz for high throughput applications in ps-laser micromachining. HyperRapid NX HyperRapid NX This industrial picosecond laser features high…

Related Products: Industrial Picosecond Lasers | Picosecond | 100w Fiber Laser

Microelectronics

Microelectronics

…diode-pumped solid-state lasers at 266 nm and 355 nm or picosecond lasers, further reduce production costs and at the same time significantly enhance yield and efficiency of HB-LEDs. Related Products AVIA NX LEAP MATRIX QS DPSS Lasers RAPID NX Related Product Families Laser Machines and Systems Flex…

Related Products: Fpd | Co2 Laser Tube | 244 Nm Laser

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

COHR WhitePaper High Repetition Rate USP Lasers Improve OLED Cutting Results.pdf

…7, 2018 www.coherent.com | tech.sales@coherent.com | 800-527-3786 | 408-764-4983 High Repetition Rate USP Lasers Improve OLED Cutting Results High power ultraviolet, picosecond industrial lasers are widely employed because of their proven ability to perform cost effective processing of a wide range…

Related Products: Oled | Laser Glass Cutting | 355 Nm Laser

IndPhotonics Micromachining Glass Cutting.pdf

IndPhotonics Micromachining Glass Cutting.pdf

…
nanosecond laser for laser grooving, but
now we've switched to a 1064-nm picosecond laser and perform stealth dicing. This has delivered several benefits.
First, the picosecond laser produces a
much smaller heat-affected zone than
the nanosecond laser," Zhao explained.
…

Related Products: Laser Glass Cutting | Sapphire Drilling | Fluorine Laser

HYPER RAPID Lasers | Coherent

HYPER RAPID Lasers | Coherent

…RAPID The family of HyperRapid picosecond lasers offers performance at 50 W and 100 W at 1064 nm and 1000 kHz. Contact Us About This Product Close PRICE HERE High Power Industrial Picosecond Laser The HYPER RAPID family of high power industrial picosecond lasers is the higher power version of the…

Related Products: Beam Pointing Stability | Laser Glass Cutting | Hyper Rapid Pulse On Demand Burst Mode | Sapphire Cutting

RAPID NX Laser

RAPID NX Laser

RAPID NX The RAPID NX is a high energy picosecond laser system that offers Features & Benefits
* 7W at 1064 nm
* Repetition rate range from 50 kHz to 1000 kHz
* Up to 50µJ pulse energy
* Pulse on demand
* Burst mode
* High beam quality M2 100:1 Polarisation direction Vertical ± 3 degrees IR…

Related Products: Industrial Picosecond Lasers | Picosecond | Pointing Stability | Rapid Nx

Synchrolock-AP

Synchrolock-AP

…synchronize two Mira or Vitara lasers together, or to synchronize a Mira or Vitara laser to an external RF source. Operating in the femtosecond or picosecond (Mira only) regime, the Synchrolock-AP allows smooth wavelength tuning while keeping the lasers synchronized. Three separate actuators…

Related Products: Synchrolock | Jitter | Vitara Synchrolock

Picosecond Lasers

Picosecond Lasers

…- .Picosecond laser system that is cost-effective and fit for demanding industrial applications. Rapid NX delivers 7W and 1 MHz at 1064 nm.
* HYPER RAPID - Family of HyperRapid picosecond lasers offers performance at 50 W and 100 W at 1064 nm and 1000 kHz.
* HELIOS - Family of picosecond lasers with…

Related Products: 100 Watt | Picosecond | Industrial Picosecond Lasers | Fiber Laser 1064

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…Us About This Product Close PRICE HERE The New Generation of High Power Industrial Picosecond Laser With more than 10 years of experience in design and manufacturing of world-class industrial picosecond lasers, the HyperRapid NX builds on a solid foundation, improving uptime, performance, and…

Related Products: Hyper Rapid Pulse On Demand Burst Mode | Industrial Picosecond Lasers | Picosecond | Hyperrapid Nx 355

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions