Ask a Question
Coherent
Search Results
Refine

Result Type

1 - 12 of 33 Products for 'Polycarbonate' Page 1 of 3 |

Polycarbonate

Intersign CaseStudy.pdf

Intersign CaseStudy.pdf

…substrate is styrene, with a thin (about 0.020 inches) sheet of polycarbonate bonded on top of it. In this case, Intersign uses CO2 to kiss cut the polycarbonate without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid. The laser…

Industrial Photonics - January 2015

Industrial Photonics - January 2015

…substrate is styrene, with a thin sheet (~0.020 in./~0.51 mm) of polycarbonate bonded on top of it. In this case, the laser is used to kiss cut the polycarbonate without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid in the…

00 Laser Cooling.book

00 Laser Cooling.book

…alloy of lead and tin) Viton Neoprene (inlet and outlet water hoses) Celcon (water flow sensor) Table 6. Cooling Water Delivery System Construction Materials RECOMMENDED MATERIALS Stainless steel, Brass, Plastic (Polycarbonate, Polyethylene, Nylon), Copper PROHIBITED MATERIALS Iron, Aluminum, Steel

Intersign CaseStudy.pdf

Intersign CaseStudy.pdf

…substrate is styrene, with a thin (about 0.020 inches) sheet of polycarbonate bonded on top of it. In this case, Intersign uses CO2 to kiss cut the polycarbonate without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid. The laser…

COHR LMTbrochure 0816revA 1.pdf

COHR LMTbrochure 0816revA 1.pdf

…· Available palletized material handling for maximum throughput · Multiple g acceleration for maximum throughput of detailed parts · Large polycarbonate cover for easy access and safe viewing of cutting · Easy to use intuitive controls · On-board system diagnostic suite · LaserLink CAD/CAM software…

COHR LMTbrochure 0816revA 1.pdf

COHR LMTbrochure 0816revA 1.pdf

…· Available palletized material handling for maximum throughput · Multiple g acceleration for maximum throughput of detailed parts · Large polycarbonate cover for easy access and safe viewing of cutting · Easy to use intuitive controls · On-board system diagnostic suite · LaserLink CAD/CAM software…

COHR LMTbrochure 0816revA 1.pdf

COHR LMTbrochure 0816revA 1.pdf

…· Available palletized material handling for maximum throughput · Multiple g acceleration for maximum throughput of detailed parts · Large polycarbonate cover for easy access and safe viewing of cutting · Easy to use intuitive controls · On-board system diagnostic suite · LaserLink CAD/CAM software…

Intersign-Case-Study-Coherent-Laser-Machine-Tools-Speed-Sign-Cutting.pdf

Intersign-Case-Study-Coherent-Laser-Machine-Tools-Speed-Sign-Cutting.pdf

…the sign substrate is styrene, with a thin (~0.020") sheet of polycarbonate bonded on top of it. In this case, the META is used to kiss cut the polycarbonate, without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid. This is easy…

Intersign CaseStudy.pdf

Intersign CaseStudy.pdf

…substrate is styrene, with a thin (about 0.020 inches) sheet of polycarbonate bonded on top of it. In this case, Intersign uses CO2 to kiss cut the polycarbonate without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid. The laser…

Industrial Photonics - January 2015

Industrial Photonics - January 2015

…substrate is styrene, with a thin sheet (~0.020 in./~0.51 mm) of polycarbonate bonded on top of it. In this case, the laser is used to kiss cut the polycarbonate without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid in the…

Intersign CaseStudy.pdf

Intersign CaseStudy.pdf

…substrate is styrene, with a thin (about 0.020 inches) sheet of polycarbonate bonded on top of it. In this case, Intersign uses CO2 to kiss cut the polycarbonate without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid. The laser…

Intersign-Case-Study-Coherent-Laser-Machine-Tools-Speed-Sign-Cutting.pdf

Intersign-Case-Study-Coherent-Laser-Machine-Tools-Speed-Sign-Cutting.pdf

…the sign substrate is styrene, with a thin (~0.020") sheet of polycarbonate bonded on top of it. In this case, the META is used to kiss cut the polycarbonate, without affecting the underlying polystyrene. Next, the polycarbonate layer is removed, and the sign characters are inlaid. This is easy…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions