Search Results

25 - 36 of 52 Products for 'Power Meter Selection' Page 3 of 5 |

Power Meter Selection

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…laser output power through the LCD on the remote
control module. The power monitor is factory calibrated and
requires no further adjustment. The correct wavelength must be
selected on the remote control module for proper calibration.
If you wish to have an accessory power meter

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

…laser pulse by
integrating power
· Meter and Range Hint
unavailable
· Auto Range disabled
CW and average power
Statistics mode: MAX, MIN,
MEAN
Statistics mode: MAX,
MIN, MEAN
Optical
Function not available CW power
Statistics mode: MAX,…

FieldMaxII-P User Manual

FieldMaxII-P User Manual

…range selection display 4-10
Meter modes
Hz display 4-12
Internal triggering 4-11
N
Not available data 4-5
O
Overview
AC adapter 3-6
Battery replacement 3-5
Front panel 3-2
Left side panel 3-5
Right side panel 3-4
P
Power

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

…when power is first applied to the
meter.
Up and Down
Arrows
These buttons serve a dual purpose. When Edit mode is
active, the buttons are used to adjust the currently-selected
edit field. When Edit mode is not active, the buttons are used
to select the measurement…

FieldMaxII Family DS

FieldMaxII Family DS

…TRIG Select trigger level with energy sensors - Select trigger level with energy sensors
SETUP/LOCAL Set and enter button/Takes local control of meter back from PC
ARROW KEYS Manually control range; Select Stats parameter; Select and change numerical values
Left Side Panel Power jack…

2009 LMCCatalog86.pdf

2009 LMCCatalog86.pdf

…(µm) Power Meter Power Sensor C-30 10.6 FieldMaxII-TO PM30 C-40, C-55, C-70 10.6 FieldMaxII-TO PM150 G-100, G-150 10.2 to 10.7 FieldMaxII-TO PM150 G-100i 9.4 ±0.3 FieldMaxII-TO PM150 K-250, K-225i, K-300 10.4 to 10.8 FieldMaxII-TO PM300F-19 E-400, K-500 10.2 to 10.8 FieldMaxII-TO PM1K GEM Select 50,…

LabMax-Pro Mobile for Android User Guide

LabMax-Pro Mobile for Android User Guide

…Title
bar:
If the attached meter is still not identified, with the
power ON, unplug and then plug in the USB
connector.
3. Set/verify the options listed below by tapping the
title of each option in the Options menu and then
selecting the setting:
· Measurement…

LabMax-Pro Mobile for iOS User Guide

LabMax-Pro Mobile for iOS User Guide

…Title
bar:
If the attached meter is still not identified, with the
power ON, unplug and then plug in the USB
connector.
3. Set/verify the options listed below by tapping the
title of each option in the Options menu and then
selecting the setting:
· Measurement…

00 Sabre Preinstall.book

00 Sabre Preinstall.book


selected on the remote control module for proper calibration.
If you wish to have an accessory power meter available, it should be
rated for the full power output of the laser. Coherent Power Meters
are listed in Table 9.
Table 9. Recommended Power Meters
COHERENT POWER

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…Control Accessories
The FieldMaxII-TO laser power meter and PS10Q thermopile sensor provides power
measurement from 100 µW to 1W with 10 µW resolution and spectral compensation
from the UV to the IR. The meter features user selectable spectral correction, onboard
statistical…

FieldMate DS 4.qxd

FieldMate DS 4.qxd

…kg (1.75 lb.)
Instrument Power Two 9V alkaline batteries,
90 to 260 VAC, 50/60 Hz
Display 26 x 89 mm (1.02 x 3.5 in.), fixed-segment LCD
Digital LCD Update Rate >
=3 times/sec.
Analog Meter
Meter Response Tau = 80 ms (2 Hz)
Meter Scale 0 to 3, 60 divisions,…

FMII-TOP QuickStartGuideRevAD.fm

FMII-TOP QuickStartGuideRevAD.fm

…W
J
Measuring Power With a Thermopile or
Optical Sensor
The following illustration describes how to take a power
measurement using a thermopile or optical sensor.
If Joules mode is currently selected,
press the J/W button to
select Watts mode.o
Connect…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions