Search Results

1 - 12 of 38 Products for 'Power Meter Selection' Page 1 of 4 |

Power Meter Selection

LabMax Meters DS 8.qxd

LabMax Meters DS 8.qxd

…1104619
1 Meter supplied with 4400 mAH Li-ion battery, AC power adapter, power cord, 6-ft. USB cable, RS-232 adapter, 256 MB USB flash stick,
three RCA-to-BNC adapters, user manual, software and driver CD, soft carrying case, and certificate of calibration.
2 User selectable display…

LabMax Meters DS

LabMax Meters DS

…thermopile and optical (selectable) (selectable)
Measurement Range Sensor dependent (reference sensor specifications)
Accuracy
Digital Meter ±1.0% ±2LSD
System Meter accuracy + sensor accuracy
Analog Output ±1.0%
Uncertainty ±1.0%
Power Sampling Rate (Hz) 10

Chameleon-Peak-Power-White-Paper.pdf

Chameleon-Peak-Power-White-Paper.pdf

…Paper
There are practical considerations when selecting a
laser with or without dispersion compensation.
Considerations include the following:
The laser is more complex and larger. Prism
based compressors add at least 2-3 meters of
optical path length to a laser output…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…Energy Meter Quick Reference Guide 8
Compatibility Chart for Our Most Popular Meters and Sensors 9
LabMax-Pro SSIM 10-13
LabMax Meters 14-16
FieldMaxII Meters 17-18
FieldMate 19
LaserCheck 20
Meter Accessories 21
Power Sensors
Introduction and Selection

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual


Command: SYSTem:ERRor:CLEar
Query: none
Measurement Setup
and Control
Measurement Mode
Sets the meter measurement mode to select either power (Watts) or
energy (Joules) measurement mode.
Command: CONFigure:MEASure {DEFault|J|W}
Default: J (Joules) mode.…

Innova Sabre brochure

Innova Sabre brochure

…Automatic Wavelength Selection q
When you select a wavelength from the remote module, Sabre immediately tunes the intracavity prism to
the desired wavelength. Next, it optimizes the cavity alignment for maximum
power. Then, it automatically calibrates the power meter to the lasing…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…is not a pyroelectric or fast power
sensor.
Range Select Range Value Select
This command selects the meter measurement range, expressed in
the units defined under the current measurement mode (Joules or
Watts). The measurement range is selected by expressing the
maximum…

COHR LabMaxProApp DS 0117 3.pdf

COHR LabMaxProApp DS 0117 3.pdf

…tablet is connected by USB cable or WiFi to Coherent's newest and flagship LabMax-Pro meter, which works with virtually all of Coherent's extensive selection of laser power and energy sensors. LabMax-Pro meters provide continuous sampling at 10 Hz or 20 kHz, or burst sampling at 625 kHz, and the app…

LabMax PC Software Installation and Quick Start Guide

LabMax PC Software Installation and Quick Start Guide

…the Selection
knob to select the range.
Select Auto if you want
the meter to select the
best measurement range
for you.
Z
Y
Press the MEASURE button.
X
Connect a thermopile or optical
sensor to the 25-pin connector
and turn the meter ON.…

Book.book

Book.book


Power Meter
Accessories
Coherent offers a variety of instruments for laser test and measurement. For additional detailed information, including product selection guides, visit our web site: www.Coherent.com.
For the most common diagnostics need--measuring the output
power of…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…laser output power through the LCD on the remote
control module. The power monitor is factory calibrated and
requires no further adjustment. The correct wavelength must be
selected on the remote control module for proper calibration.
If you wish to have an accessory power meter

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

…laser pulse by
integrating power
· Meter and Range Hint
unavailable
· Auto Range disabled
CW and average power
Statistics mode: MAX, MIN,
MEAN
Statistics mode: MAX,
MIN, MEAN
Optical
Function not available CW power
Statistics mode: MAX,…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions