Search Results

Refine
1 - 12 of 12 Products for 'Powermax Installer' Page 1 of 1 |
  • 1

Powermax Installer

PowerMax-USB/RS Sensors

PowerMax-USB/RS Sensors

…sensors are useful for general laboratory applications in which experimental data acquisition is performed from a central PC PowerMax Software Coherent’s PowerMax PC applications software provides a virtual instrument interface for these sensors that enables the operator to take laser power…

PowerMax-RS Sensors

PowerMax-RS Sensors

…Sensor (1179504) Related Materials White Papers PowerMax USB RS User Manual PowerMax Water Cooled OEM Detector Applications Note PowerMax RS Sensor Manual Miniaturization Technology Provides Next Generation Laser Power Measurement PowerMax USB Installation Troubleshooting Guide Call +1 800 527 3786…

PowerMax-USB sensors

PowerMax-USB sensors

…USB (1275678) Related Materials White Papers PowerMax USB-RS User Manual PowerMax Water Cooled OEM Detector Applications Note PowerMax RS Sensor Manual Miniaturization Technology Provides Next Generation Laser-Power Measurement PowerMax USB Installation Troubleshooting Guide Call +1 800 527 3786 |…

LabMax-Pro SSIM

LabMax-Pro SSIM

…LabMax-Pro SSIM (1268881) Datasheet LabMax-Pro Data Sheet Related Materials White Papers LabMax-Pro SSIM User Manual LabMax-Pro PC Software Installation and Quick Start Guide Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has locations across the globe that are available to provide…

LabMax-Pro PC Software Installation and Quick Start Guide

LabMax-Pro PC Software Installation and Quick Start Guide

LabMax-Pro PC Software Installation and Quick Start Guide
ii
This document and software is copyrighted
with all rights reserved. Under the copyright
laws, this document and software may not be
copied in whole or in part or reproduced in
any other media without the…

PowerMax-USB-RS-Sensors-Product-Guide.pdf

PowerMax-USB-RS-Sensors-Product-Guide.pdf


+5 VDC power source. An external power supply may be plugged into the
6 mm barrel receptacle, or alternatively, for custom OEM installations
power may be provided on the unused Pin 1 through the DE-9 connector.
Additional information concerning integration of the OEM thermopiles,…

mhtml:file://C:\Users\nelsonc\Desktop\PowerMax troubleshooting.

mhtml:file://C:\Users\nelsonc\Desktop\PowerMax troubleshooting.

…step above should remove the PowerMax sensor from Device Manager. Once that is complete, disconnect the PowerMax sensor from the USB port on the computer, then reconnect the PowerMax sensor to the same USB port. The sensor should go through the new driver installation the same way it did the first…

COHR PowerMax-Pro 15mm DS 0619 6.pdf

COHR PowerMax-Pro 15mm DS 0619 6.pdf

…Type DB25
Cable Length 2.5 m (8.2 ft)
Part Number 1342383 1382766 1342384
1 Power is adjustable by changing amplifier gain.
2 Customer supplied.
3 Unpatterned detectors are recommended for small beams <2 mm diameter in fixed installations with minimal beam movement.

COHR PowerMax-Pro 15mm OEMdetectors DS 0619 3.pdf

COHR PowerMax-Pro 15mm OEMdetectors DS 0619 3.pdf

…Sensor user manual for integration guidelines.
3 The "UP" type detectors are recommended only for small beams <2 mm diameter in fixed installations with minimal beam movement. For larger beams choose HD or BB models.
PowerMax-Pro 15 mm OEM Detector
Optical Reflectivity

book.book

book.book

…the diverging beam exiting the multi-mode
fiber. See "Optimize the Coupling Efficiency" (p. 2-22).
Install the Fiber-Ready (FR) Adapter
This section lists the steps to install a Fiber-Ready (FR) dovetail adapter.
1. Measure the maximum output power from the laser.
If the…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual


· The sensor active area must be large enough to contain
the diverging beam exiting the multimode fiber (about
8 mm).
Installing the FC
Dovetail
1. Measure the collimated max output power from the BioRay
laser (Plaser). If the photodiode sensor saturates,…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…a
+5 VDC power source. An external power supply may be plugged into the
6 mm barrel receptacle, or alternatively, for custom OEM installations
power may be provided on Pin 1 through the DE-9 connector. Additional
information concerning integration of the OEM thermopiles,…