Search Results

Refine
37 - 48 of 58 Products for 'Powermax' Page 4 of 5 |
Related Categories: Pm10 19c | Pm150 19c | Pm1k 36c | Lm-10 Manual | Ps19q

Powermax

Microsoft Word - AppNote012.doc

Microsoft Word - AppNote012.doc

PowerMax Water-Cooled & OEM Detector Application Note Caution While working with the water connections, avoid getting any water on the surface of the detector. Water will corrode the coating on the detector surface and cause damage during use. If water does come in contact with the detector…

book.book

book.book

…using an external power meter
that is calibrated and is appropriate for the output power level of the laser.
Coherent recommends using a PowerMax USB, UV/VIS Quantum power
sensor, PS19Q, or similar.
Should you need any additional technical support, contact Coherent Product

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

www.Coherent.com I LMC.sales@coherent.com I (800) 343-4912 I (408) 764-4042 6
White Paper
Modulated 10.6 µm CO2
Laser
50 µs PW
8 kHz PRF
40% Duty Cycle
Figure 6
Pulse Shape Visualization Obtained with a PowerMax-Pro Sensor
and LabMax-Pro Electronics…

COHR LabMaxProApp DS 0117 3.pdf

COHR LabMaxProApp DS 0117 3.pdf

LabMax-Pro Mobile App Datasheet
TYPICAL PERFORMANCE DATA
The following screenshots show several of the app's key features and capabilities
High Resolution Snapshot Data from PowerMax-Pro
Tuning Needle
Save, Import, and Export Data between Notebook and PC Apps
Histogram…

LabMax-Pro Mobile for iOS User Guide

LabMax-Pro Mobile for iOS User Guide

Setting Software Options
23
Pulse Analysis: Provides analytics on data gathered in
Snapshot or High-Speed mode using PowerMax-Pro
sensors. Cursors are moved to bound the area of
data--such as a pulse or multiple pulses--that is to be
analyzed. The software will perform…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual
2 - 10
Figure 2-7. RV Spectral Correction for PowerMax-Pro Sensors (Normalized to Calibration
Wavelength)
Table 2-1. Wavelength Compensation Accuracya
a. Refers to wavelengths different from the calibration wavelength.
Sensor
Wavelength…

LabMax-Pro Mobile for Android User Guide

LabMax-Pro Mobile for Android User Guide

LabMax-Pro Mobile for Android User Guide
24
Pulse Analysis: Provides analytics on data gathered in
Snapshot or High-Speed mode using PowerMax-Pro
sensors. Cursors are moved to bound the area of
data--such as a pulse or multiple pulses--that is to be
analyzed. The…

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

Superior Reliability & Performance
QI-19.140 Rev. AC
Page 2 of 6
PM-series 10W and 150W water-cooled sensors
Water port threads: 1/8" NPT
Included fittings: plastic quick-connect for hose size ¼" ID x 3/8" OD
Minimum water flow rate: 0.2 GPM (0.75 LPM)

PM-Pro Cleaning Guide Sep2014.pdf

PM-Pro Cleaning Guide Sep2014.pdf

www.Coherent.com I lmc.sales@coherent.com I (800) 527-3786 I (408) 764-4983 3
September 2014
sensor surface or scratches from debris being carried off the sensor. This process should be repeated using clean
wipes until any contaminants and streaks have been removed from the sensor…

COHR PMP 15mm OEM Drawing 0619

COHR PMP 15mm OEM Drawing 0619

25.0 mm (0.984 in. ) Negative Electrical ContactArea Passivation Mask Area Positive Electrical Contact Are Passivation Mask Area 15.0 mm (0.59 in.) Notch Location +0.127 -0.254 +0.005 -0.010 3.0 mm (0.12 in.) 2X 8.5 mm (0.33 in.) 2 1 21.5 mm (0.85 in.) 2X 2.0 mm (0.08 in.) 1.5 mm (0.06 in.) 3.0 mm…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

Converting a BioRay Laser to FC
B - 5
8. Add alignment marks on the fiber body and the laser body as
shown below (you can use a felt-tip marker or a ballpoint pen
on a small piece of tape). Note: The alignment marks will be
used in step 11 (p. B - 10) of the "Optimizing the…

COHR PMP 15mm Drawing 0619p1

COHR PMP 15mm Drawing 0619p1

PowerMax-Pro 15 mm Sensor Strain Relief Cable 2X Ø 3.5 mm (0.14 in.) Thru All Mounting Holes for #4 or M3 Fasteners Aperture Face Detector Surface is 6.2 mm (0.24 in.) from Aperture Face Ø 11.9 mm (0.47 in.) Ø 7.9 mm (0.31 in.) 43.7 mm (1.72 in.) 6.4 mm (0.25 in.) 25.4 mm (1.00 in.) 37.6 mm (1.48…