Because of the small displacements required to cancel acoustic noise and the low inertia of the
mirror assembly, the short stack enables cavity length adjustment at frequencies up to 20 kHz.
The total displacement of the tall stack from 0V to 100V tunes the laser output by…
micrometer adjustments so that the beam is reflected back to
its source with the beam centered on the mirror.
There are stops at the limit of travel of the micrometer adjustments. Do not try to force adjustments once the stop is reached.
If an adjustment limit is reached,…
…a pseudoanalog"tune bar,"giving real-time feedback as the laser mirrors are adjusted.
M2 Beam Propagation Analyzer
Easy Beam Alignment
Real-Time Power Density Adjustment
…an adjustable tip/tilt probe mount. The Vial/Tablet Sample Holder incorporates an adjustable steering
mirror, interchangeable focusing lens, and safety shutter, and the Steerable Non-contact Optic Mount allows for projection and
steering of the output beam with precision alignment…
…a diode-pumped Nd laser will have servos to adjust
temperature and output power of the pump diodes to maintain stable output power from the resonator. In addition, other servos may control the perfect
alignment of the resonator mirrors.
Some materials - like…
…nm. But, because of the high beam quality
of fiber lasers, the light can be focused down to a small
spot size. With enough power, very precise, high-quality
welds are possible, Mendes said. This is the case both for
CW lasers and those with pulsed outputs from a microsecond down…
…lens or mirror which can be used to
project the beam onto a wall or screen for visual inspection.
Use extreme caution when projecting an expanded laser beam
with a mode cup. The expanded beam is sufficiently intense to
cause severe eye damage.
For more precise measurements,…
…to generate low-noise, large-bandwidth, and high-peak power ultrafast pulses. The prisms are adjustable along with a slit assembly to provide tunability of the bandwidth and center wavelength. Precise control of the spatial mode
profile allows stable operation at bandwidths in excess of 125…
…lasers. Traditionally, lasers were
built using adjustable and lockable optical mounts,
which contain many separate metal parts including
threaded holes, screws and flexures. In this approach,
the mounts are adjusted to bring the laser into perfect
alignment and locking…
…absorption of mirrors and other surfaces.
Chameleon Vision-S mitigates this limitation of Ti:S in
two ways. First, by taking advantage of the higher
pump power from the integrated Verdi-18 pump laser.
And second, by using extremely low loss and large
bandwidth mirrors that…
…of mirrors and
other surfaces. Chameleon Vision-S mitigates this
limitation of Ti:Sapphire in two ways. Firstly, by taking
advantage of the higher pump power from the
integrated Verdi-18 pump laser and secondly, by using
extremely low loss and large bandwidth mirrors that…
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.