Search Results

37 - 48 of 212 Products for 'Presentation' Page 4 of 18 |

Presentation

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13 Return…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13 Return…

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

…Response Function
rli No
*
*.
* Return the present operating current of
the laser diode in mA
rtt No
*
*.
* Return the TEC present measured
temperature of laser diode in degrees
Celsius
rti No
*
*.
* Return the TEC present operating current
in mA
stt:
*
*.
* OK…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13 Return…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13 Return…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13, 14 Return…

00 E-250 Pre.book

00 E-250 Pre.book

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13 Return…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…output signal indicating the shutter is closed.
This output signal will be asserted when the shutter is present and closed.
During latching faults, this signal will not be present since the shutter is
disabled.
10 (+) and 23 (-) Reserved Do not connect.
12, 13 Return…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…room. Laser light will remain
collimated over long distances and therefore presents a potential hazard if not confined.
9. Post warning signs in the area of the laser beam to alert those
present.
10. Advise all those using the laser of these precautions. It is good
practice…

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

…room. Laser light will remain
collimated over long distances and therefore presents a potential hazard if not confined.
9. Post warning signs in the area of the laser beam to alert those
present.
10. Advise all those using the laser of these precautions. It is good
practice…

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

…output power in mW
rli? No
*
*.
*
* Return the present operating current of
the laser diode in mA
rtt? No
*
*.
*
* Return the TEC present measured
temperature of laser diode in degrees
Celsius
rti? No
*
*.
*
* Return the TEC present operating current
in mA
len No OK…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…and Activity Log
is also provided. Please note that the screen shots provided in
Figure 41 were taken during a test case condition and does not
reflect the nominal values present in an actual system.
With "RFPS 1 to 5" Tab Selected
Figure 41. System Monitoring Applet