Search Results

13 - 24 of 146 Products for 'Pulse Energy Measure' Page 2 of 13 |

Pulse Energy Measure

EnergyMax-RS Sensors

EnergyMax-RS Sensors

…enable the measurement of the energy per pulse or average power of pulsed lasers from the nanojoule to the multi-joule level, over wavelengths from the deep ultraviolet through the far infared, and form single pulses to repetition rates of 1 kHz (with measurements of every pulse). Additionally,…

WaveMaster Wavelength Meter

WaveMaster Wavelength Meter

…required
* 380-1095 nm wavelength range
* RS-232 interface Contact Us About This Product PRICE HERE Close Pulse and CW Wavelength Measurement The WaveMaster measures the wavelength of both CW and pulsed lasers of any repetition rate. The wavelength can be displayed in GHz, wavenumbers, or nanometers…

LabMax-Pro SSIM

LabMax-Pro SSIM

…sampling for laser pulse visualization
* USB and RS232 interfaces
* Windows PC application
* Direct host command support for OEM integration
* Windows 7 and 8 compatible (32 and 64-bit) Contact Us About This Product PRICE HERE Close New Features This power and energy meter combines the power…

LaserCam HR-InGaAs

LaserCam HR-InGaAs

…Modes of Operation Pulsed, CW default Pixel Size (µm) 30 x 30 Pulsed Mode Trigger Methods Trigger In (TTL) Saturation CW (at 1064 nm) 3.5 mW/cm2 (with LDFP), 50 µW/cm2 (without LDFP) Saturation CW (at 1523 nm) 350 µW/cm2 (with LDFP), 30 µW/cm2 (without LDFP) Saturation Pulse (at 1064 nm) 5 µJ/cm2…

LabMax-TOP

LabMax-TOP

--> LabMax-TOP Laser Power and Energy Meter (RoHS)
* Measures laser power and energy
* Ergonomic design enhances user experience
* Compatible with LM- and PM-model thermopile and optical sensors with beam position display
* Pulse energy to 10 kHz
* Data logging to onboard memory and to USB flash…

LaserCam-HR II

LaserCam-HR II

…default trigger delay of the camera model and the repetition rate of the laser, the trigger delay feature assists in assuring that a valid laser pulse is captured on the camera during the cameras exposure time. The LaserCam-HR II cameras have a default integration time of 5 msec for optimum…

EnergyMax Heat Sink Accessories

EnergyMax Heat Sink Accessories

…used to increase the average power capability of EnergyMax sensors. Use one of these heat sinks when you want to measure your pulsed laser at higher repetition rates or at higher energy levels. The heat sinks are easily installed by threading them onto the back of a sensor housing with a 1/4-20 cap…

High Peak Power Thermopile Sensors

High Peak Power Thermopile Sensors

…These sensors are designed for use with pulsed high-peak-power, low repetition rate, Q-switched Nd:YAG lasers. A volume-absorbing substrate mounted in front of the detector absorbs the bulk of the laser energy, thus preventing all of the laser energy from striking the front surface of the detector…

Laser Power Sensors

Laser Power Sensors

…for measuring laser power to 150W. Fan-Cooled Thermopile Sensors 300W Fan-Cooled Thermopile Sensors 300W Fan-cooled thermopile sensors for measurement of laser power up to 300W. High Power Water-Cooled Thermopile Sensors to 5kW High Power Water-Cooled Thermopile Sensors to 5kW Measure industrial…

kW PowerMax Pro Sensor

kW PowerMax Pro Sensor

…where it enables CW laser power and pulsed laser energy to be sampled much more frequently, resulting in increased throughput and improved process control. Specifications PMP 1 kW PMP 3 kW Average Power Range¹ (continuous) 1W to 1 kW 1W to 3 kW Maximum Pulsed Peak Power (kW) 1 5 Noise Equivalent…

PowerMax-USB sensors

PowerMax-USB sensors

…have been adapted into a ‘PowerMax-USB’ cable that can be integrated to most Coherent power sensors providing accurate power measurements of all types of CW and pulsed sources from the UV to Far IR. Support & Download Center Drawing Packages Click the links below to download a complete drawing…

Position Sensing Air-Cooled Thermopile Sensors 200W

Position Sensing Air-Cooled Thermopile Sensors 200W

…user to safely and precisely align the sensor and the beam being measured. This is particularly useful for non-visible beams. These air-cooled, surface absorbing sensors are intended for measurement of low to medium power pulsed and CW lasers from the 10 mW to 100 W power range. Convection cooling…