Search Results

1 - 12 of 94 Products for 'Pulsed Ir Laser' Page 1 of 8 |

Pulsed Ir Laser

Ultrashort Pulse Laser Products

Ultrashort Pulse Laser Products

--> Ultrashort Pulse Laser Products The Coherent ultrashort pulse lasers include femtosecond lasers with up to 900 fs pulse widths and picosecond lasers with up to 80 MHz repetition rates. Femtosecond Lasers - the ultrafast pulses delivered by femtosecond lasers enable the most demanding, high…

Levante IR fs OPO

Levante IR fs OPO

laser systems. Contact Us About This Product See Related Products Close PRICE HERE Femtosecond OPO with Automated Wavelength Tuning Levante IR’s synchronous pumping scheme provides a stable repetition rate that is matched to the laser performance. The generation of both the Signal and Idler pulses

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…designed for high damage threshold when used with pulsed lasers used in medical procedures such as Erbium and Holmium lasers. It has a damage threshold in excess of 100 J/cm at 2940 nm with a 100 µs pulse width. YAG/Harmonics and IR Series products are also “smart” sensors, and incorporate…

FLARE NX Short-Pulsed DPSS Lasers

FLARE NX Short-Pulsed DPSS Lasers

…Diode-Pumped Solid-State Lasers Available in wavelengths from UV to IR, the FLARE NX offers short-pulse durations of ~1 ns, high repetition-rates up to 2 kHz, and high pulse energies up to 500 µJ. The solid-state technology guarantees longer lifetimes than gas lasers; therefore, increasing quality…

Monaco femtosecond laser

Monaco femtosecond laser

Laser Ultrashort Pulse Fiber Laser for Materials Processing & Microelectonics Production and Scientific Applications The Monaco industrial femtosecond laser provides IR, Green, or UV output for 24/7 production environments. Its compact size allows for easy integration and service. The laser offers…

RAPID NX Laser

RAPID NX Laser

…high energy picosecond laser system that offers Features & Benefits
* 7W at 1064 nm
* Repetition rate range from 50 kHz to 1000 kHz
* Up to 50µJ pulse energy
* Pulse on demand
* Burst mode
* High beam quality M2 100:1 Polarisation direction Vertical ± 3 degrees IR Contrast ratio > 100:1 Defined…

Energy Max Laser Sensors

Energy Max Laser Sensors

…damage threshold, large area, laser energy sensors that allow measurements over a wide range of wavelengths, beam diameters, power levels, and repetition rates. YAG/Harmonics And IR sensors YAG/Harmonics And IR sensors Very high damage threshold, large area, laser energy sensors optimized for…

Excimer Laser EnergyMax Sensors

Excimer Laser EnergyMax Sensors

--> Excimer Laser EnergyMax Sensors

Key Features:
* Unique MaxUV coating delivers increased damage threshold, long term UV exposure resistance and high repetition rate operation
* Operate over the 190 nm to 2.1 µm range
* Enable pulse energy measurements from 50 µJ to 250 mJ
* Measure single shot to…

Femtosecond Lasers

Femtosecond Lasers

…In science, these lasers address the requirements of optogenetics, multi-photon microscopy, and spectroscopy.
* NEW: Axon Lasers: Compact and cost-effective discrete wavelength femtosecond lasers.
* Monaco Industrial Lasers: The Monaco ultrashort pulse laser comes in IR, Green, and UV and features…

HyperRapid NX/NXT - Industrial Picosecond Laser

HyperRapid NX/NXT - Industrial Picosecond Laser

…picosecond platform in the extensive industrial short pulse lasers portfolio. HyperRapid NX delivers up to 250 µJ pulse energy with typically 10 ps duration at repetition rates up to 1 MHz.
* Output powers are up to 100 W in the IR, 50 W in the visible and 30 W in the UV. These performances…

CUBE Lasers

CUBE Lasers

…with M 2 ≤1.2
* Minimal laser output RMS noise ≤0.1%
* CDRH Class IIIb safety compliance
* USB and RS-232 control
* Continuous wave and pulsed up to 150 MHz
* Analog and digital modulation Contact Us About This Product See Related Products Close PRICE HERE CUBE Diode Laser System For inquiries,…

Nanosecond Lasers

Nanosecond Lasers

--> Nanosecond Lasers Nanosecond laser families range from the UV to the IR with wavelengths up to 1064 nm, repetition rates up to 2 kHz, and pulse energy up to 1000 µJ. These lasers are ideal for performing precision processing with excellent material removal rates for applications in…