Search Results

1 - 9 of 9 Products for 'Q-switched Co2 Laser' Page 1 of 1 |
  • 1

Q-switched Co2 Laser

COHR DiamondCx-10LQS DS 0118 3.pdf

COHR DiamondCx-10LQS DS 0118 3.pdf

Diamond Cx-10LQS Q-Switched CO2 Lasers The Cx-10LQS CO2 laser from Coherent provides short laser pulses with high peak power of 2 kW to 5 kW over the operating range from single shot to 100 kHz. The Cx-10LQS is a compact laser system operating at a wavelength of 9.3 µm with a fully integrated inter…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…the fibers, a Q-Switched CO2 or UV laser e.g. AVIA applies. The open fiber structure enables higher shear strength after welding, as the molten thermoplast of the other welding partner flows around and in between the fibers. Related Products AVIA NX Laser Machines and Systems Lasers for Carbon Fiber…

Solar High Efficiency AR Coatings

Solar High Efficiency AR Coatings

…cards, electrical wires, medical products and signs. Most of these applications are serviced by Qswitched, diode-pumped, solidstate (DPSS) lasers with nanosecond pulsewidths, CO2 lasers or fiber lasers. Often these applications are highly cost sensitive, in terms of system cost and cost per mark.…

HighValueMarkingApps.pdf

HighValueMarkingApps.pdf

Laser User Issue 74, Summer 2014 11 Many established marking applications are quite cost sensitive in terms of both capital cost and the cost per mark. As a result, such applications typically make use of Q-switched, diode-pumped, solid-state (DPSS) lasers with nanosecond pulse widths, CO2 lasers,

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

laser, which can be operated in CW, Q-switched
and mode-locked formats. Here, laser diodes optically pump a rare-earth doped fiber, which typically emits at about 1 m.
Nd:YAG, CO2
, fiber and direct diode lasers are the workhorses of industrial laser applications. Direct diode lasers

CMM 11.3.indd

CMM 11.3.indd

…with the 193 nm excimer laser: a single solution to meet the demands of a changing market Figure 2: Engravings in mineral glass using the 193 nm ExciStar laser at a spot size of 40 µm (left image) and a q-switched pulsed CO 2 laser at a spot size of 120 µm. The CO 2 laser mark shows thermal effects…

Bio Photonics - February/March 2018

Bio Photonics - February/March 2018

…in damaged nerves and a distorted facial
appearance. A Q-switched laser by Coherent has allowed highly localized ablation
with minimized risk of damaging nearby
vessels and nerves.
The carbon monoxide (CO) laser is
a rare exception to the dominant trend
toward…

an rep 2018 workfile 02

an rep 2018 workfile 02

…broad product portfolio. Laser
sources include the Diamond series mid-power CO and CO2
lasers; the DC series of high power CO2
lasers; Highlight FL high power fiber lasers; the DF series of high power diode laser systems; the
Diamond mid-power and Q-Switched fiber; the COMPACT,…

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

…3. A CO laser with only 9W of output power produced this clean, curved cut (6 mm radius circle) in thin
glass (50 µm thick) at a feed rate of 140 mm /sec.
Laser Ablation
Laser ablation relies on a completely different mechanism to process glass than CO2 and CO lasers,
which…