Search Results

1 - 12 of 26 Products for 'Rapid Manual' Page 1 of 3 |

Rapid Manual

Picosecond laser

Picosecond laser

…simulation In order to simulate the network connection use the test program included in this package (choose the version Hyper
Rapid). Refer to the Operator's Manual to get further descriptions. Refer to the separate document "DLL specification" for
a list of software commands.

FieldMate

FieldMate

…Displayable Full-Scale Power Ranges (with thermopile sensor) 29.9 mW to 29.9 kW (auto or manual ranging, selectable) Displayable Full-Scale Power Ranges (with optical sensor) 999 nW to 99.9 mW (auto or manual ranging, selectable) Accuracy - Digital Meter ±1.0% of reading Accuracy - System Meter…

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

…#9,012,848) represents a dramatic technological advancement in laser power sensing that utilizes a thin-film detector only microns thick which rapidly senses thermal changes due to incident laser energy. The result is a measurement response time below 10 μs, as compared to over 1 second for…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…on top of the damaged area or by manual grinding – scarfing the damaged area and refilling it with repair plys. The grinding process is preferred over the bolting process because it offers higher strength and reliability of the repair. Unfortunately the manual process involved in grinding is not…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual
4 - 14
Aperture Area
This command sets the aperture area, expressed in square centimeters (cm2).
Command: CONFigure:AREA:APERture {0.01..500.00}
Default is 1.0
Query: CONFigure:AREA:APERture?
Reply: 0.01..500.00
Analog Output Full…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…ISO 9001:2000 company, our products are NIST traceable, and our calibration labs are fully ANSI Z540 compliant.
In addition to the technological advantage, we also strive to deliver
the best service in the industry, with a knowledgeable and responsive
staff, and rapid turnaround.

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual
7 - 2
tently perform as expected under their actual use conditions. We are
a registered ISO 9001:2000 company, our products are NIST traceable, and our calibration labs are fully ANSI Z540 compliant.
In addition to the technological advantage, we also…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual
7 - 2
tently perform as expected under their actual use conditions. We are
a registered ISO 9001:2000 company, our products are NIST traceable, and our calibration labs are fully ANSI Z540 compliant.
In addition to the technological advantage, we also…

FieldMaxII-P User Manual

FieldMaxII-P User Manual

FieldMaxII-P User Manual
7 - 2
tently perform as expected under their actual use conditions. We are
a registered ISO 9001:2000 company, our products are NIST traceable, and our calibration labs are fully ANSI Z540 compliant.
In addition to the technological advantage, we also…

ModeMaster PC User Manual

ModeMaster PC User Manual

ModeMaster PC User Manual
3 - 18
The magnitude of the fractional error |/| this produces is
(2x2
x2/f2). Limiting the fractional error to < 1% then gives the
Gamma limit criterion. Note that
max is largest at x2 = 0 since the
slope of the vs. x2 curve is zero…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual
1 - 6
Laser Safety
Shutter Module
with Diode Pointer
(Optional)
The optional laser safety shutter module with diode pointer has been
designed specifically for the J-5 series lasers. It is integrated into the

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual
1 - 6
Laser Safety
Shutter Module
with Diode Pointer
(Optional)
The optional laser safety shutter module with diode pointer has been
designed specifically for the J-3 series lasers. It is integrated into the