Search Results

Refine
1 - 12 of 17 Products for 'Rapid Operator Manual' Page 1 of 2 |

Rapid Operator Manual

Picosecond laser

Picosecond laser

…simulation In order to simulate the network connection use the test program included in this package (choose the version Hyper
Rapid). Refer to the Operator's Manual to get further descriptions. Refer to the separate document "DLL specification" for
a list of software commands.

FieldMate

FieldMate

…Displayable Full-Scale Power Ranges (with thermopile sensor) 29.9 mW to 29.9 kW (auto or manual ranging, selectable) Displayable Full-Scale Power Ranges (with optical sensor) 999 nW to 99.9 mW (auto or manual ranging, selectable) Accuracy - Digital Meter ±1.0% of reading Accuracy - System Meter…

PowerMax-Pro USB/RS Sensors

PowerMax-Pro USB/RS Sensors

…a thin-film detector only microns thick which rapidly senses thermal changes due to incident laser energy. The result is a measurement response time below 10 μs, as compared to over 1 second for traditional thermopiles. These detectors can operate at high power over a spectral range as broad as…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…technologies. This enables
us to perform instrument and sensor calibration under virtually any
combination of wavelength, power, and operating characteristics.
Sensors are calibrated against NIST-traceable working standard
sensors which are, in turn, calibrated against…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…a
process shutter that requires rapid open and close cycles. When the
shutter is closed, the laser beam is reflected off of the shutter blade
into a liquid-cooled beam dump to terminate the beam. The blade is
designed for fail-safe operation and is closed with the power off.

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

DIAMOND J-5 Series OEM Laser Operator's Manual
2 - 6
Optics The resonator optics are within the sealed compartment and require
no maintenance or alignment. Upon exiting the laser cavity, the
asymmetrical laser beam (wide in one transverse beam axis and
narrow in the…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…a
process shutter that requires rapid open and close cycles. When the
shutter is closed, the laser beam is reflected off of the shutter blade
into a liquid-cooled beam dump to terminate the beam. The blade is
designed for fail-safe operation and is closed with the power off.

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…a
process shutter that requires rapid open and close cycles. When the
shutter is closed, the laser beam is reflected off of the shutter blade
into a liquid-cooled beam dump to terminate the beam. The blade is
designed for fail-safe operation and is closed with the power off.

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…a
process shutter that requires rapid open and close cycles. When the
shutter is closed, the laser beam is reflected off of the shutter blade
into a liquid-cooled beam dump to terminate the beam. The blade is
designed for fail-safe operation and is closed with the power off.

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…a
process shutter that requires rapid open and close cycles. When the
shutter is closed, the laser beam is reflected off of the shutter blade
into a liquid-cooled beam dump to terminate the beam. The blade is
designed for fail-safe operation and is closed with the power off.

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

…5.5mm Center Positive Standard Jack for supplying operating voltage and current
GND VCC
Figure 2 - Electrical Connections
Power LED: LED on indicates power on
Laser LED: LED on indicates laser on
Status LED: Meaning
Rapid flashing (30 ms on / 30 ms off)
Waiting for…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…a
process shutter that requires rapid open and close cycles. When the
shutter is closed, the laser beam is reflected off of the shutter blade
into a liquid-cooled beam dump to terminate the beam. The blade is
designed for fail-safe operation and is closed with the power off.