Search Results

1 - 12 of 36 Products for 'Reflective Objective' Page 1 of 3 |

Reflective Objective

Industrial Photonics - July 2017

Industrial Photonics - July 2017

…and laser projector on the same side of the normal to the object surface. This dramatically reduces the
chance of specular reflections, unless the object is highly
textured. It works best with highly reflective objects.
This configuration also substantially reduces height resolution…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…ANSI, ACGIH, or OSHA standards listed at the end of this
section for guidance.
3. Avoid wearing watches, jewelry, or other objects that may
reflect or scatter the laser beam.
4. Stay aware of the laser beam path, particularly when external
optics are used to steer the beam.…

PL-501 Book.book

PL-501 Book.book

…hazard for back reflections. Change the objects to be less reflective whenever
possible. Adding Anti-Reflective (AR) coatings to optics and more diffuse
surfaces to mounts or beam shutters can help.
· If possible, add an angle to the object so that the reflection does not enter the…

book.book

book.book

…A-2) for more
information.
· Watch where the reflections from objects are returning to make sure the reflections
are not at or near the laser exit aperture. Change the objects to add an angle so the
object is less reflective whenever possible. Add an optical isolator to those…

Microsoft Word - inspect-online - A Flexible Approach - 2016-02-02

Microsoft Word - inspect-online - A Flexible Approach - 2016-02-02

…for planar objects. The Specular geometry may be preferred where height resolution is a
primary consideration or where low object reflectivity (i.e., image brightness) is an issue. And
conversely, the Look-Away arrangement is sometimes used where high object reflectivity is a challenge.…

Vision Systems - June 2015

Vision Systems - June 2015

…specular reflections, from
the laser. This can cause measurement errors if
these reflections produce saturation or blooming in the detector. On the other hand, higher
reflection could be used to increase signal
levels from dark colored objects since dark
objects reflects

Libra PreInstallation.book

Libra PreInstallation.book

…ANSI, ACGIH, or OSHA standards listed at the end of this
section for guidance.
3. Avoid wearing watches, jewelry, or other objects that may
reflect or scatter the laser beam.
4. Stay aware of the laser beam path, particularly when external
optics are used to steer the beam.…

COHR WP ChameleonPeakPower 2018-08.pdf

COHR WP ChameleonPeakPower 2018-08.pdf

…(Chameleon XR) operated at a pulse duration tailored around the typical GDD of microscope
systems including a complex objective lens, a modulator and a few other reflective elements.
Figure 2 illustrates how a pulsewidth of about 140 fs is close to the optimum for a broad range
of…

Vitara Preinstall.book

Vitara Preinstall.book

…ANSI, ACGIH, or OSHA standards listed at the end of this
section for guidance.
3. Avoid wearing watches, jewelry, or other objects that may
reflect or scatter the laser beam.
4. Stay aware of the laser beam path, particularly when external
optics are used to steer the beam.…

00 Legend Elite Preinstallation.book

00 Legend Elite Preinstallation.book

…ANSI, ACGIH, or OSHA standards listed at the end of this
section for guidance.
3. Avoid wearing watches, jewelry, or other objects that may
reflect or scatter the laser beam.
4. Stay aware of the laser beam path, particularly when external
optics are used to steer the beam.…

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

…generated. See
"Laser Safety Eyewear" on page 1-4. for additional information.
3. Avoid wearing watches, jewelry, or other objects that may
reflect or scatter the laser beam.
4. Stay aware of the laser beam path, particularly when external
optics are used to steer the beam.…

Revolution High-Power Q-Switched Laser System Preinstallation Manual

Revolution High-Power Q-Switched Laser System Preinstallation Manual

…ANSI, ACGIH, or OSHA standards listed at the end of this
section for guidance.
3. Avoid wearing watches, jewelry, or other objects that may
reflect or scatter the laser beam.
4. Stay aware of the laser beam path, particularly when external
optics are used to steer the beam.…