Search Results

1 - 7 of 7 Products for 'Refrigerant' Page 1 of 1 |
  • 1

Refrigerant

00 Laser Cooling.book

00 Laser Cooling.book

…circulates around a
closed path that includes the laser and a chiller. The heat generated by the laser is removed in the chiller, typically a refrigeration unit which discharges its excess heat into air or liquid.
Each type of system has advantages and disadvantages for cooling
ion…

Laser Marking Workstations

Laser Marking Workstations


* Circumferential marking module (oscillating table configuration only)
* Digital readout, motorized or programmable upgrade of Z-Axis
* Refrigerated recirculating water chiller for all LME-RM versions (laser dependent)
* Automated Pick ‘N Place parts handling
* Custom Motion Control ability…

DIAMOND C-20 and C-30 Liquid-Cooled OEM Lasers Preinstallation Manual, Rev. AF

DIAMOND C-20 and C-30 Liquid-Cooled OEM Lasers Preinstallation Manual, Rev. AF

…3-2 shows the recommended
connection from the customer-supplied refrigerated recirculator to the C- 20 and C-30 laser systems.
Coherent recommends that the coolant water flowing from the customersupplied refrigerated recirculator flow to the laser head, then to the RF
power module.…

Laser Focus World - January 2018

Laser Focus World - January 2018

…cooled by laser chillers,
which can operate via either TEC or via
other types of refrigeration, predominantly vapor compression. Optitemp (Traverse
City, MI) makes various types of refrigeration chillers, including portable (rollable)
liquid- and air-cooled, rack-mount liquidand…

Coherent Flowdown Provisions 11 15 2016.pdf

Coherent Flowdown Provisions 11 15 2016.pdf

…the product was manufactured with or
contains ozone-depleting substances
52.223-12 Maintenance, Service, Repair or Disposal of
Refrigeration Equipment and Air Conditioners (JUN
2016)
If subcontract is for services involving
maintenance, repair or disposal of any

Photonics Spectra - August 2018

Photonics Spectra - August 2018

…ratios. A key factor here is low laser intensity
noise, which would otherwise cause heating of the trapped atoms.
Levitating the refrigerator
A particularly dynamic area of trapping research that currently involves
nanoparticles is quantum optomechanics. Even though matter…

00 M5C Pre Install.book

00 M5C Pre Install.book

Safety
1 - 9
Hot Material
Hazard
Some target materials, whether workpieces or scrap, may be hot
after the cutting or engraving process. Wear leather gloves when
handling recently cut material, or allow enough time for the material
to cool before handling.