Search Results

Refine

Result Type

1 - 12 of 13 Products for 'Replace The Coolant' Page 1 of 2 |
Related Categories: Termotek | P307 | 460 Nalco | Chiller Manual | Paladin Manual

Replace The Coolant

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…LED. After sufficient coolant has been added,
press the ON/OFF button (arrow up) to start the chiller.
6. Confirm that there are no leaks at the water connection sites on
the laser head and the chiller. Correct any leaks.
7. When the chiller is full, replace the fill cap.

Microsoft Word - QI-19.140 revAC.docx

Microsoft Word - QI-19.140 revAC.docx

QI-19.140 Rev. A Flow Re A Cohere Caution While wor Water will water doe water is to into the co Coolant Tap The rela Do Eth Allo wa me Ma mu sho rate It is sup will flow to a sys Fitting an The follow water flow using thes threshold or contact density sp the fittings other that void the w AC…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…system. Also, only use fresh, clean coolant mix (OptiTemp
recommends that the coolant be drained and replaced annually).
Freeze/Burst
Protection
The recommended coolant mixture does not provide freeze
protection; therefore the coolant temperature must be maintained

00 E-250 Pre.book

00 E-250 Pre.book

…result in fouling and blockage of the cooling
system. Also, only use fresh, clean coolant mix (OptiTemp
recommends that the coolant be drained and replaced annually).
Table 3-2. Recommended Coolant for E-250 Series Lasers
PRODUCT
NAME
MANUFACTURER'S
NAME &…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book


growth, which can result in fouling and blockage of the cooling
system. Also, only use fresh, clean coolant mix (OptiTemp
recommends that the coolant be drained and replaced annually).
OPTISHIELD is the recommended corrosion inhibitor, however it
may not be readily available…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB


Coolant hoses
Coolant kit (if supplied) contains particle filter, fittings
and coolant hose required to provide coolant to the laser
system from the liquid-cooling system (specific to laser
order)
Yes
1233216
Optional
Coolant Kit
Coolant
Amount…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

Coolant kit 1
Filters particles from coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit contains particle filter, fittings and coolant
hose required to provide coolant

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

Coolant kit 1
Filters particles from coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit contains particle filter, fittings and coolant
hose required to provide coolant

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…liquid coolant to laser system No
Coolant kit 1
Filters particles from coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit contains particle filter, fittings and coolant

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…temperature regulated liquid coolant to laser system No
Coolant kit 1
Filters particles from coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit (if supplied) contains…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…regulated liquid coolant to laser system No
Coolant kit 1
Coolant kit contains particle filter, fittings and coolant hose
required to provide coolant to the laser system from the
liquid-cooling system
Yes
1233216
Optional
Coolant Kit
Coolant Amount varies…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…The blade is
designed for fail-safe operation and is closed with the power off.
While in safe mode, a low power red laser pointing diode replaces
the high power beam. The red laser pointer beam is factory aligned
with the main beam. The beam dump temperature is continuously

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions