Search Results

25 - 36 of 43 Products for 'Safety Shutter' Page 3 of 4 |

Safety Shutter

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…LabLaser
NOTE Line generator modules (0220 936 00 and 31 0268 000)
do not included shutter
4.8 mm
(0.19 in.)
5.3 mm
(0.21 in)
15.4 mm
(0.61 in.)
Safety Shutter
Diode Laser
Systems
Diode Laser
Modules
Lasiris
Structured

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…facility appoint and train a Laser
Safety Officer (LSO) responsible for overseeing all aspects of laser
safety.
Design systems with safety in mind. Use engineering controls such
as: enclosed beam paths, interlocked covers, and shutters.
Designate a laser controlled area and…

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

…The shutter status is monitored
continuously via two light barriers, one for the OFF status and one
for ON status.
The shutter will close in standard operation within 10 ms. The reaction time of the shutter at an alarm is 25 ms.
NOTICE!
The shutter is a required safety

EnergyMax-USB/RS Software Installation and Quick Start Guide

EnergyMax-USB/RS Software Installation and Quick Start Guide

…your PC and begin taking energy measurements using the EnergyMax PC software.
WARNING!
Follow all laser safety procedures. The laser
must be switched OFF or shuttered before
running the tutorial presented in this section.
NOTICE!
For instructions on communicating with…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…and one
for ON status.
The shutter will close in standard operation within 10 ms. The reaction time of the shutter at an alarm is 25 ms.
If a shutter problem occurs, the laser diodes are disabled.
NOTICE!
The shutter is a required safety feature for laser operation. It is…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…PC and start taking energy measurements
using the EnergyMax PC software.
WARNING!
Follow all laser safety procedures. The laser must be switched
OFF or shuttered before running the tutorial given in this
section.
NOTICE!
For instructions on communicating with the…

COHR ExcimerCatalog2019.pdf

COHR ExcimerCatalog2019.pdf


1161812
1107556
1107557
1157558
Safety Options
Class 1 Housing
Automated Safety Class 3 Interlock Circuit
Automated Beam Shutter for 193 nm
Automated Beam Shutter for 248 nm
Automated Beam Shutter for 308 nm
Part Number
1161814
1161815…

Libra PreInstallation.book

Libra PreInstallation.book


Safety Interlocks The system incorporates multiple safety interlocks which activate
when the top cover of the Vitesse, Evolution, or any one of the three
top covers of the Libra is removed. An interlock fault initiation will
terminate all lasing by activating a shutter mechanism…

book.book

book.book

…Nominal Ocular Hazard
zones, as specified in IEC 60825-1.
Safety Interlocks
A safety interlock is not available on a standalone laser. There is no internal shutter in
StingRay and BioRay lasers.
A safety interlock is part of the StingRay/BioRay Remote; see p. 6-8 for…

Innova Sabre brochure

Innova Sabre brochure


stable single-frequency operation.
External Shutter
Sabre's shutter safely blocks the output
beam without interrupting lasing. It can
be accessed through the remote module
or be used as a component of your
safety interlock system.
TEM00
Detector
By…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…e.g.,
a safety light automatically switched on as the laser starts. The
switch is located on the rear of the power supply.
For more information, refer to the operator's manual.
External Shutter
Interlock
This interlock is connected to the external shutter in the laser…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual


DANGER!
The output power of this laser device is high enough to cause
permanent damage to the human eye. Wear appropriate laser
safety goggles at all times when the laser is operational.
Figure 1-1. Laser (Side View)
Base Plate
Exit Aperture
Shutter