Search Results

37 - 47 of 47 Products for 'Safety Shutter' Page 4 of 4 |

Safety Shutter

Innova Sabre brochure

Innova Sabre brochure


stable single-frequency operation.
External Shutter
Sabre's shutter safely blocks the output
beam without interrupting lasing. It can
be accessed through the remote module
or be used as a component of your
safety interlock system.
TEM00
Detector
By…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…e.g.,
a safety light automatically switched on as the laser starts. The
switch is located on the rear of the power supply.
For more information, refer to the operator's manual.
External Shutter
Interlock
This interlock is connected to the external shutter in the laser…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual


DANGER!
The output power of this laser device is high enough to cause
permanent damage to the human eye. Wear appropriate laser
safety goggles at all times when the laser is operational.
Figure 1-1. Laser (Side View)
Base Plate
Exit Aperture
Shutter

Avia preinstall.book

Avia preinstall.book

…all other electrical circuits or grounds.
Shutter Interlock The shutter will not open unless the shutter interlock circuit is
closed. If the shutter interlock circuit is opened while the laser is
operating, it will cause the shutter to close but will not turn the laser
off.

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

…output beam, which is Class 4.
Safety Interlocks The system incorporates multiple safety interlocks which activate
when the top cover(s) of the laser head is removed. An interlock
fault initiation will terminate the pump laser by activating a shutter
mechanism as well as removing…

00 Sabre Preinstall.book

00 Sabre Preinstall.book

…e.g., a safety
light automatically switched on as the laser starts. The switch is
located on the rear of the power supply.
For more information, refer to the operator's manual.
External Shutter
Interlock
This interlock is connected to the external shutter in the laser…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…radiation emission indicator (LED turning on when laser
is powered) for lasers > 700 nm
3. A permanently attached beam attenuator (a shutter or switch)
Class 3B
1. All items mentioned for Class 3R lasers
2. Laser radiation emission indicator, regardless of wavelength

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…output beam, which is Class 4.
Safety Interlocks The system incorporates multiple safety interlocks which activate
when the top cover(s) of the laser head is removed. An interlock
fault initiation will terminate the pump laser by activating a shutter
mechanism as well as removing…

00 Legend Elite Preinstallation.book

00 Legend Elite Preinstallation.book

…output beam, which is Class 4.
Safety Interlocks The system incorporates multiple safety interlocks which activate
when the top cover(s) of the laser head is removed. An interlock
fault initiation will terminate the pump laser by activating a shutter
mechanism as well as removing…

Vitara Preinstall.book

Vitara Preinstall.book

…which is Class 4.
Safety Interlocks The system incorporates multiple safety interlocks which activate
when the cavity cover of the laser head or power supply is removed.
An interlock fault initiation will terminate all lasing by activating a
shutter mechanism as well as removing…

Coherent ExactWeld230P DS EN 1019.pdf

Coherent ExactWeld230P DS EN 1019.pdf


Position Accuracy 0.1 mm (in.)
NOISE
Noise (acoustic field on workplace) <70 dB (A)
INSTALLATION CONDITIONS
Laser Safety Class (according to EN60825-1:2015) Laser Class 1
Description As seated and standing workplace available (rotary table)
Working Temperature…