Search Results

13 - 17 of 17 Products for 'Sapphire 488 20' Page 2 of 2 |

Sapphire 488 20

COHR SapphireFP DS 1119 1.pdf

COHR SapphireFP DS 1119 1.pdf


Sapphire
488 FP
Wavelength1 (nm) 458 ±2 488 ±2
Output Power at Fiber Exit2 (mW) 40 40, 80, 120, 200
Fiber Type SM-PM3
Fiber Length (m) 1
Fiber Output FC/APC; 8° angled4
Spatial Mode TEM00, M2 <1.1
Beam Asymmetry <1:1.1
Noise (%)
20 Hz to…

Microsoft Word - Coherent Whitepaper-Raman and bacteria 4-2019

Microsoft Word - Coherent Whitepaper-Raman and bacteria 4-2019

…a few tens of milliwatts of output
power is required. This need is met with the low-noise Sapphire SF series which provide a
choice of 488 and 532 nm outputs with powers ranging from 20 to 150 mW.
Stabilized visible and NIR laser diodes. In addition to scattered laser light, some…

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

…noise).
Coherent pioneered the commercial use of OPSL
technology starting in 2001 with 20 mW power 488 nm
lasers under the brand name SapphireTM (see
Figure 4). The Sapphire brand quickly expanded to
include other wavelengths and higher powers. In 2007,
Coherent…

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…Fluor 488 WGA, Alexa Fluor 568 phalloidins and DAPI. Excitation source: sub-10-fs pulses from a
Ti:sapphire laser oscillator and adaptive pulse compression. TPEF signals were detected in epi-direction by
a spectrally resolved multichannel photomultiplier tube. Scale bar is 20 m. Courtesy…

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

MerMAIDs: a family of metagenomically discovered marine anion-conducting and intensely desensitizing channelrhodopsins

…37028,
Edmund Optics, York, UK).
FTIR spectroscopy. To prepare samples for FTIR, 10 µl of initial protein solution
(>20 mg/ml, 100 mM NaCl, 20 mM Tris, 0.05% DDM [pH 8]) was dried stepwise
on a BaF2
window under a stream of dry air and subsequently rehydrated. Samples…