Search Results

Refine

Result Type

1 - 12 of 12 Products for 'Smoke' Page 1 of 1 |
  • 1

Smoke

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…dry air (CDA) is also acceptable.
J-3 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics…

Microsoft Word - Coherent Santa Clara Travel Information and Visitors Guide.docx

Microsoft Word - Coherent Santa Clara Travel Information and Visitors Guide.docx

…that Coherent and most California hotels are non-smoking.
Smoking is permitted in designated areas (outside) only.
Hotels: If you smoke in a non-smoking room, you may be charged an extra fee.
Please enquire about their smoking policies upon arrival.
Corporate Rates in Santa Clara…

00 LMT Pre.book

00 LMT Pre.book

…(Halon-type recommended).
Operator The LMC must not be run unattended.
Turn off machine & exhaust at any sign of
excessive smoke or material is not cutting
through.
Electrical High Voltage Voltages inside LMC can be lethal.
Disconnect power to LMC if any service…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…dry air (CDA) is also acceptable.
J-3 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics…

00 E-250 Pre.book

00 E-250 Pre.book

…air (CDA) is also acceptable.
E-250 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics and…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…dry air (CDA) is also acceptable.
J-5 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…dry air (CDA) is also acceptable.
J- Series lasers are used in a wide range of material processing which
often has by-products of dust, smoke, fumes, oil, and various gases.
These by-products can cause contamination of the laser head optics
as well as the beam delivery optics and…

00 E-1000 PreInst.book

00 E-1000 PreInst.book


with a purity of 99.95%.
E-1000 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics and…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…air (CDA) is also acceptable.
E-400 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics and…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…dry air (CDA) is also acceptable.
J-2 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…air (CDA) are both acceptable.
J-3-5 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery system and…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…dry air (CDA) is also acceptable.
J-5 Series lasers are used in a wide range of material processing
which often has by-products of dust, smoke, fumes, oil, and various
gases. These by-products can cause contamination of the laser head
optics as well as the beam delivery optics…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions