Search Results

25 - 36 of 212 Products for 'Solid State Laser' Page 3 of 18 |

Solid State Laser

FLARE NX Short-Pulsed DPSS Lasers

FLARE NX Short-Pulsed DPSS Lasers

…113°F) Ambient Storage Temperature (°C) -20 to +50°C (-4 to 122°F) Laser Head Heat Dissipation 2 (W) =40 Relative Humidity (%)(non-condensing) <80 Laser Head Dimensions (W x H x L) 93.5 x 38.25 x 160 mm (3.68 x 1.5 x 6.3 in) Laser Head Weight ~1.25 kg (2.75 lbs.) Controller Dimensions (W x H x L)…

MATRIX Family of DPSS Lasers

MATRIX Family of DPSS Lasers

…nm. MATRIX QS DPSS Lasers
* Matrix 355
* Matrix 532
* Matrix 1064 MATRIX CW Lasers
* Matrix 1064-10-CW See more product details of each below. All MATRIX Family of DPSS Lasers MATRIX QS DPSS Lasers MATRIX QS DPSS Lasers The MATRIX family of diode-pumped, solid-state, Q-switch lasers is available in…

Verdi V-Series

Verdi V-Series

…features state of the art AAA pump diode material. Coherent’s AAA material has the longest track record with record operating hours in the field for years. The pump diode modules are located conveniently inside the power supply and deliver pump light via a single core pump fiber to the laser head.…

Mira Family

Mira Family

…Picosecond Ti:Sapphire laser systems bring simplicity and flexibility together in an innovative design to produce a powerful and versatile system. Mira-HP - Commercial ultrafast Ti:Sapphire laser at >3.5W. Mira 900 - Includes Mira Femto, Mira Pico, and Mira Dual (femto + pico) Ti:Sapphire lasers.

DFG 9800/9850

DFG 9800/9850

…extend the tuning of our OPAs into the mid-IR range. When combined with a Coherent all-solid-state ultrafast system, consisting of the Verdi pump laser, Mira Optima 900 Ti:S oscillator, RegA 9000 regenerative amplifier, and OPA 9800 or OPA 9850, the DFG 9800/9850 allows continuous tuning from 2.55…

Compass 115M

Compass 115M

--> Compass 115M Continuous wave green laser with best performance-to-price ratio featuring excellent laser beam parameters and output powers of 5 mW, 10 mW, 15 mW and 20 mW. Excellent laser beam parameters, highest unit-to-unit consistency, hands-free operation plus superior reliability and…

Volume Holographic Grating Filters (VHG)

Volume Holographic Grating Filters (VHG)

…PicoPulse™ Pulse Stretcher/Compressor Filters Coherent’s PicoPulse™ pulse stretcher/compressor filters enable high peak power in femtosecond pulsed laser systems, with a distortion-free round output beam. PowerLocker® Wavelength Stabilization Gratings PowerLocker® Wavelength Stabilization Gratings…

Genesis CX-SLM

Genesis CX-SLM

…CX laser - Collection of libraries for communication to the laser device FTDI D2XX Direct Drivers FTDI drivers for the CX laser - Device drivers for the CX laser device OPSL gui Graphical User Interface for the CX laser OPSL Test Diagnostic software for the CX laser - Software used to check laser

PowerLocker® Wavelength Stabilization Gratings

PowerLocker® Wavelength Stabilization Gratings

…or VBGs) that lock a laser diode’s emission wavelength into a narrowed optical spectrum. This increases the spectral brightness and delivers highly stabilized optical performance over extended temperature ranges. PowerLockers typically reduce the spectral output of a laser by an order of magnitude.…

PowerLine E Twin

PowerLine E Twin

…Class IV laser sub-system, comprising two solid-state laser markers. These two laser markers enable simultaneous and asynchronous marking of a single work piece or of multiple individual parts on panel-level, thus delivering double the effective marking speed of traditional, single laser based…

AVIA LX Solid State Q-Switched UV Laser

AVIA LX Solid State Q-Switched UV Laser

AVIA LX Solid-State Q-Switched Ultraviolet Lasers AVIA LX is a 20 W (at 355 nm) diode-pumped, solid-state, Q-switched nanosecond laser that offers an unmatched combination of high reliability, superior performance, and low cost of ownership. This is achieved, in part, through the use of the Coherent…

SST 2017-09 Laser Marking.pdf

SST 2017-09 Laser Marking.pdf

www.solid-state.com SOLID STATE TECHNOLOGY AUGUST/SEPTEMBER 2017 13
LASER MARKING
advantageous for many material processing applications, but not always for laser marking. In fact, a more
uniform beam intensity distribution, called a flat-top
profile,issometimesmore
useful…