Search Results

Refine
1 - 5 of 5 Products for 'Spiricon' Page 1 of 1 |
  • 1

Spiricon

Industrial Photonics - July 2014

Industrial Photonics - July 2014

July 2014 Industrial Photonics 25
other materials are transparent in the visible but not in
the UV. Once the pulse energy is above a certain threshold, these materials can be machined using ultraviolet
light. The ability to do so is of particular interest to the
makers of…

COHR DiamondCx-10LQS DS 0118 3.pdf

COHR DiamondCx-10LQS DS 0118 3.pdf

…and Peak Power will vary depending on operating parameters, specifically Pulse Frequency and Duty Cycle.
4 Gaussian Correlation based on Spiricon Near Field Raw Beam measurement at 80 cm distance from laser output, 20°C, and steady state operation at 80 kHz PRF, and 5 µsec PW.
5 Ratio…

COHR PaladinCompact355 DS 0318 3.pdf

COHR PaladinCompact355 DS 0318 3.pdf

…and Peak Power will vary depending on operating parameters, specifically Pulse Frequency and Duty Cycle.
4 Gaussian Correlation based on Spiricon Near Field Raw Beam measurement at 80 cm distance from laser output, 20°C, and steady state operation at 80 kHz PRF, and 5 µsec PW.
5 Ratio…

Laser Focus World - September 2015

Laser Focus World - September 2015

a)
b) c)
L A S E R B E A M D I A G N O S T I C S continued
can be outfitted with a 250-370 nm UV
filter or a 1250-1350 near-infrared (NIR)
filter if needed. Its associated software produces 2D, 3D, and x-y displays, as well
as beam diameter, divergence, and wander; beam…

AVIA 355-28 DS

AVIA 355-28 DS

STACCATO
Wavelength (nm)(center) 1030 ±2
Average Power (W) >
_2.4 at 80 kHz
Pulse Energy (µJ) >
_30
Pulse Duration t (FWHM, sech2) 1300 fs <
_t <
_ 2000 fs
Pulse Energy Stability (%)(Peak-to-Peak over 1000 Pulses) <
_5 RMS (1s)