Search Results

1 - 12 of 83 Products for 'Spot Size' Page 1 of 7 |

Spot Size

GeoLasHD excimer ablation laser system

GeoLasHD excimer ablation laser system

…Density on Sample (J/cm 2) 1 - 50 Spot Diameter on Sample (µm) 2 - 160 Optical Resolution (µm) 1 Pulse Energy Stability (%, rms) 1 Beam Homogeneity (%, rms) 1 Max. Repetition Rate (Hz) 10 (opt. 100) X,Y-Drive Min. Step Size (µm) 0.1 Z-Focus Min. Step Size (µm) 0.1 GeoLasHD Key Features Ultrashort…

DIAMOND J-3-5 CO Laser - 5µm

DIAMOND J-3-5 CO Laser - 5µm

…applications). The other significant advantage of shorter wavelength is that it can be focused to a smaller spot size than a longer wavelength. The CO laser output can be focused to a spot 2 times smaller than that of a CO 2 laser. This enables the production of smaller holes and features, and…

SST 2017-09 Laser Marking.pdf

SST 2017-09 Laser Marking.pdf


Moreover, data
matrix codes can be quite small, with cell sizes of only
125 µm or even less. Since the spot size of the focused
laser beam must thus be much smaller than the cell
size, the final spot diameter must be significantly less
than 100 µm.
Defective…

Laser Welding Systems

Laser Welding Systems

Laser Welding Systems Spot, circle, wave or quilting weld seams - we provide intelligent system solutions for numerous 2D and 3D welding applications. Our laser welding systems cover a wide range: modern remote welding systems, ergonomically optimized manual welding lasers, joystick-controlled…

eLP11-02-56  Coherent

eLP11-02-56 Coherent

…processing. Nearly all these instruments use one or more lasers to excite the fluorescence, where the laser is focused to a small area or spot size (typical spot sizes are given in Table A). By using several laser wavelengths to excite multiple fluorophores, some of these instruments can analyze…

Microelectronics

Microelectronics

…field. Microscopic laser inspection uses scattering, absorption and ultrasonic techniques to determine and locate a defect or a contamination of sizes in the range of the wavelength used. The Verdi series of CW solid-state lasers in the green and the Sapphire™ family in the blue cover scattering…

Miniature Diode Laser Modules

Miniature Diode Laser Modules

…lifetime. With ultra low-noise capability, the spatial qualities of the laser beam do not change, allowing the beam to be focused on the same spot size, profile, and shape. Datasheet Ultra Low-Noise Laser Diode Modules Ultra Low-Noise with Ultra Capabilities - Our ultra low-noise laser diode modules…

Graphic Arts & Display

Graphic Arts & Display

…achievable spot size (numerous other factors also influence memory capacity). Changing to visible light sources would overcome the limitation, since they would yield smaller spot sizes for the same M2 value. Visible DPSS lasers obviously provide a high-quality mode, but their current size and cost…

StarPack HP

StarPack HP


* The StarPack HP combines a new 3-axis scanner which offers an impressive working area of up to 1,250 mm x 1,250 mm while maintaining small spot sizes. A high-power system which is, for example, used for on-the-fly cutting of stiffer packaging materials like cardboard or blister packages at full…

Focusing Units

Focusing Units

Focusing Units These assemblies focus the parallel beam from the collimating unit onto the workpiece. The size of the focused spot and the depth of focus are given by the combination of collimating optics, focusing optics and beam quality. The focusing units come either with a fixed or a…

PowerLine AVIA NX UV Laser Sub-System for micromachining applications

PowerLine AVIA NX UV Laser Sub-System for micromachining applications

…AVIA NX laser source with a two axis galvanometer deflector, a beam expander and an f-theta scan lens. This combination produces small focused spot sizes at the work surface, with high positional accuracy and stability, resulting in the ability to quickly and consistently create fine features and…

High Power Laser | HighLight™ FL-1000P Pulsed Fiber Laser

High Power Laser | HighLight™ FL-1000P Pulsed Fiber Laser

…product of typical 20 mm x mrad (for a 400 μm, round core output fiber) enables this power to be effectively concentrated into small focused spot sizes. The unique combination high average power, high pulse energy and superior beam quality makes the HighLight FL1000P an ideal laser source for…