…collimated by a high-aperture lens.
Additionally, the beam is formed by a prism pair to achieve a round
beam in the far field. A thermoelectric cooler is integrated for stabilizing the diode laser. Excess heat is removed via the base plate of
Figure 2-1. CUBE Laser System Components…
…Close PRICE HERE High-Power Structured Light Pattern Generating Laser The Magnum II has fully protected electronics as well as a bipolar thermoelectric cooler used to keep the laser diode at a constant temperature. The laser beam can be modulated by an external signal and all models can operate…
…PRICE HERE High-Power Structured Light Pattern Generating Laser Bridging the power gap between the popular SNF and Magnum series lasers, this thermoelectrically cooled device is able to emit uniform laser lines at high powers. With exceptional beam pointing and focusing stabilities, the PowerLine…
…power measurement with extended average power handling capability up to 3 kW with a 30 microsecond rise time and utilizing the same transverse thermoelectric thin-film HD sensor technology as our standard PowerMax-Pro sensor. Contact Us About This Product PRICE HERE Close kW PowerMax Pro Sensor…
…robust water-cooled technology with a low cost of ownership for models up to 5W while higher levels of output power are enabled by an advanced thermo-electrical cooling scheme. All Legend Elite Duo HE+ models employ an additional, single-pass power amplifier, also TE-cooled. The standard pump laser…
Genesis MX MTM-Series Datasheet
OPS Head Mounted on Heat Sink Heat Sink with Thermoelectric
Heat Sink Top Features
Thin film thermoelectric sensor
with parallel heat flow
50 s response time
…semiconductor photodiode. A new, patentpending sensor architecture that meets
these requirements is based on thermoelectric technology but is constructed
The thermoelectric generating materials
used in this sensor are a stack of films with
layer thicknesses on the order of…
For many years thermopiles have been the detector of choice for
high power lasers. These detectors operate on the thermoelectric
principle in which thermal energy is converted into electrical energy.
The typical thermopile has a central, light absorbing disk,…
…for small devices, paired with convective air cooling) is adequate. Step up a bit in output power and a LD may require the addition of a thermoelectric cooler (TEC). For the highest output powers, such as those produced by diode bars and arrays for materials processing, water cooling is necessary.…
…addition, the laser has exceptional beam pointing and focusing stability. The Magnum II has fully protected electronics as well as a bipolar thermoelectric cooler used to keep the laser diode at a constant temperature. The laser beam can be modulated by an external signal and all models can operate…
…range for BioRay is 10 to 40°C.
· Environments in which the diode is soaked -10 to 50°C. In
warmer environments, use a heatsink or a thermoelectric
Figure 2-1. Modulation Curves
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.