Ask a Question
Coherent

Search Results

Refine
1 - 12 of 102 Products for 'Thread Adapter' Page 1 of 9 |
Related Categories: Fiber-optic Connector | Lm3 | Lm-45 | Ps10 | Lm10

Thread Adapter

Fiber Optic Connector Adapters

Fiber Optic Connector Adapters

…to threads around entrance apertures. FC and SMA fiber optic adapters are available for several sensor models. Part numbers 1098589 and 1098339 thread onto the 3/4-32 threads around the entrance apertures of the LM-2, OP-2, LM-3, LM-10, and LM-150 FS sensors. These fiber adapter connectors…

PowerMax-USB-RS-Sensors-Product-Guide.pdf

PowerMax-USB-RS-Sensors-Product-Guide.pdf

…The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with our 1.035-40M adapter ring to fit on the LM-45 sensor. The following fiber adapters can be mounted onto the front…

Book.book

Book.book

Head Accessories and Drawings 121 C-Mount Adapter Ring Part number: 33-7154 The C-Mount Adapter Ring is designed to attach to the face of the BeamMaster detector head. This adapter will accommodate optical devices utilizing a 1" x 32 thread pattern. Figure 24. C-Mount Adapter Ring

00 E-400 Preinstall.book

00 E-400 Preinstall.book

…Customer must prepare mounting plate per installation instructions (refer Figure 20c). Coolant hose fittings (barb to pipe thread) 2 Adapts the 1/4 inch NPT pipe thread on the laser system to accept a 1/2 inch I.D. cooling fluid hose. Cooling fluid hoses 3 Provides cooling fluid to the RF power…

00 E-400 Preinstall.book

00 E-400 Preinstall.book

…Customer must prepare mounting plate per installation instructions (refer Figure 20c). Coolant hose fittings (barb to pipe thread) 2 Adapts the 1/4 inch NPT pipe thread on the laser system to accept a 1/2 inch I.D. cooling fluid hose. Cooling fluid hoses 3 Provides cooling fluid to the RF power…

COHR LMC 2010-2011catalog.pdf

COHR LMC 2010-2011catalog.pdf

…(503) 454-5727 The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with our 1.035-40M adapter ring to fit on the LM-45 sensor. The following fiber adapters can be mounted onto the front of the…

LMC 2011catalog FINAL.pdf

LMC 2011catalog FINAL.pdf

…(503) 454-5727 The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with our 1.035-40M adapter ring to fit on the LM-45 sensor. The following fiber adapters can be mounted onto the front of the…

2010-2011-Laser-Measurement-and-Control-Catalog.pdf

2010-2011-Laser-Measurement-and-Control-Catalog.pdf

…(503) 454-5727 The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with our 1.035-40M adapter ring to fit on the LM-45 sensor. The following fiber adapters can be mounted onto the front of the…

Microsoft Word - STEADY LITE MODEL13 CIRCULAR.doc

Microsoft Word - STEADY LITE MODEL13 CIRCULAR.doc

…#239 (30749239) #240 (30749240) #100 ø2.00" (50.8mm); SM.CFV NO ADAPTER #115 SMALL GROMMET (31125001) #200 ø2.31" (58.7mm); LG.CFV NO ADAPTER #215 LARGE GROMMET (31125002)
* Adapter is threaded on both ends NOTE: All adapters are available with ESD coating; ADD "E" to the end of the part number…

Microsoft Word - STEADY LITE MODEL13 CIRCULAR.doc

Microsoft Word - STEADY LITE MODEL13 CIRCULAR.doc

…#239 (30749239) #240 (30749240) #100 ø2.00" (50.8mm); SM.CFV NO ADAPTER #115 SMALL GROMMET (31125001) #200 ø2.31" (58.7mm); LG.CFV NO ADAPTER #215 LARGE GROMMET (31125002)
* Adapter is threaded on both ends NOTE: All adapters are available with ESD coating; ADD "E" to the end of the part number…

Book.book

Book.book

…is provided with three 8-32 threaded mounting holes on its rear plate for this purpose. Fiber Adapter Part number: 33-7154 The fiber adapter is provided with an FC connector and is designed to just fit onto the aperture of the BeamMaster detector head. The fiber adapter can firmly hold an optical…

COHR PowerMaxGuide 0610.pdf

COHR PowerMaxGuide 0610.pdf

…The following fiber-optic adapters can be mounted directly onto the 3/4-32 threads on the front of LM-3 and LM-10 sensors.These fiber adapters can also be used with our 1.035-40M adapter ring to fit on the LM-45 sensor. The following fiber adapters can be mounted onto the front…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions