GPIB PC interface port -
Part Number (RoHS)
* 1104620 1104622 1104619
* Meter supplied with 4400 mAH Li-ion battery, AC power adapter, power cord, 1.8-meter USB cable, RS-232 adapter, USB flash drive,
three RCA-to-BNC adapters, user manual, software and driver CD, soft carrying…
LabMax Meters Laser Power and Energy Meters Features · Compatible with all LM-model and PM-model thermopile and optical sensors · Beam position display with quadrant thermopiles (LM-model) · Pulse energy from single shot to 10 kHz with energy sensors · PC interfacing via USB or RS-232, plus analog…
…in a standalone meter has been
reduced in size to the extent that it can now fit inside a
USB connector.The circuitry and USB connector have been
adapted into a`PowerMax-USB'cable that can be integrated
to most Coherent power sensors providing accurate power
…energy sensors in which all
meter electronics are miniaturized and integrated within
the sensor head cable. Specifically, Coherent's entire range
of high performance EnergyMax sensors are now available
in this form factor with either RS-232 or USB 2.0 connectivity.
…direct USB high-speed 2.0 connection to PC. Power provided via USB connection.
· EnergyMax-RS provides RS-232 connectivity. Power input
provided via +4-to-20 VDC input.
· Fast 14-bit A/D converter supports measurement accuracy
similar to that found in LabMax-TOP meter.
…calibration is half that of a separate meter and sensor system. The PowerMax-Pro USB and RS sensors operate with LabMax-Pro PC applications software (included). PowerMax-Pro (Patent #9,012,848) represents a dramatic technological advancement in laser power sensing that utilizes a thin-film detector…
…(SMB connector, 3 to 5 Vin, 2 to 10 mA,
50 ohm AC, 300 ohm DC impedance)
Power jack (12 VDC - center positive)
Part Numbera 1268881
a. Meter supplied with AC power adapter, power cord, USB cable, trigger cable, software and driver CD, and certificate of calibration.
Added support for LabMax Pro power meter
Added support for GenTec P-Link power meter
The WelcomeForm now looks better when the PC is using large fonts
Tweak to the SettingsForm to prevent a problem when using a USB power meter on a PC
with no COM ports
…mounting or powering separate
meter electronics. Yet, they do not require the user or
system builder to develop their own electronics. The
PowerMax-USB is a totally plug-and-play device, which
even draws its power from the USB connection, and
the only power requirement for…
…the PowerMax-Pro sensor to the LabMax-Pro meter by
connecting the DB-25 connector.
3. Attach the LabMax-Pro meter to the PC via a USB 2.0 HighSpeed port.
4. Connect the power supply to the LabMax-Pro meter.
5. Turn on the meter.
6. Start LabMax-Pro PC.
7. If a dialog…
…Remote, with Power Supply, 1 meter
laser-to-remote (SDR) cable, USB cable and software.
OBIS LX/LS 6-Laser Remote with CDRH features. Separate power switches and
power cables for each laser.
Part Number 1203909 OBIS LX/LS 6-Laser Remote, with Power Supply, 6 power