Ask a Question
Coherent
Search Results
Refine

Result Type

1 - 12 of 21 Products for 'Verdi V2 System' Page 1 of 2 |

Verdi V2 System

Verdi preinstall.book

Verdi preinstall.book

…operation. To incorporate an external safety interlock circuit into the laser system, perform the following steps: 1. Turn off the laser system. Locate and remove the Interlock connector from the back of the Verdi power supply. This type of connector is called a "three pin mini-DIN". 2. Slide…

Verdi preinstall.book

Verdi preinstall.book

…containers. The containers will be required if the system is returned to the factory for service. The containers may also be needed to support a shipping damage claim. Coherent recommends that three people unpack and transport the Verdi V-2/V-5/V-6. The power supply weighs70 pounds and should…

Verdi preinstall.book

Verdi preinstall.book

…A distance of 6 to 24 inches is recommended between the Verdi output and any laser being pumped. Excessively tight umbilical bends (less than a 5 inch radius) can cause permanent damage to the optical fiber. 2. If a water-cooled system is used, position the chiller in the operating position.…

Verdi preinstall.book

Verdi preinstall.book

…operation. To incorporate an external safety interlock circuit into the laser system, perform the following steps: 1. Turn off the laser system. Locate and remove the Interlock connector from the back of the Verdi power supply. This type of connector is called a "three pin mini-DIN". 2. Slide…

Verdi preinstall.book

Verdi preinstall.book

…operation. To incorporate an external safety interlock circuit into the laser system, perform the following steps: 1. Turn off the laser system. Locate and remove the Interlock connector from the back of the Verdi power supply. This type of connector is called a "three pin mini-DIN". 2. Slide…

Verdi preinstall.book

Verdi preinstall.book

…containers. The containers will be required if the system is returned to the factory for service. The containers may also be needed to support a shipping damage claim. Coherent recommends that three people unpack and transport the Verdi V-2/V-5/V-6. The power supply weighs70 pounds and should…

Verdi preinstall.book

Verdi preinstall.book

…containers. The containers will be required if the system is returned to the factory for service. The containers may also be needed to support a shipping damage claim. Coherent recommends that three people unpack and transport the Verdi V-2/V-5/V-6. The power supply weighs70 pounds and should…

Verdi preinstall.book

Verdi preinstall.book

…other than those specified in this manual may result in hazardous radiation exposure. Use of the system in a manner other than that described herein may impair the protection provided by the system. U.S. Export Control Laws Compliance It is the policy of Coherent to comply strictly with U.S. export…

Verdi preinstall.book

Verdi preinstall.book

…other than those specified in this manual may result in hazardous radiation exposure. Use of the system in a manner other than that described herein may impair the protection provided by the system. U.S. Export Control Laws Compliance It is the policy of Coherent to comply strictly with U.S. export…

Verdi preinstall.book

Verdi preinstall.book

…other than those specified in this manual may result in hazardous radiation exposure. Use of the system in a manner other than that described herein may impair the protection provided by the system. U.S. Export Control Laws Compliance It is the policy of Coherent to comply strictly with U.S. export…

Verdi preinstall.book

Verdi preinstall.book

…A distance of 6 to 24 inches is recommended between the Verdi output and any laser being pumped. Excessively tight umbilical bends (less than a 5 inch radius) can cause permanent damage to the optical fiber. 2. If a water-cooled system is used, position the chiller in the operating position.…

Verdi preinstall.book

Verdi preinstall.book

…A distance of 6 to 24 inches is recommended between the Verdi output and any laser being pumped. Excessively tight umbilical bends (less than a 5 inch radius) can cause permanent damage to the optical fiber. 2. If a water-cooled system is used, position the chiller in the operating position.…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions