Search Results

25 - 33 of 33 Products for 'Water Chiller Manual' Page 3 of 3 |

Water Chiller Manual

MetaBEAM1000c Pre.book

MetaBEAM1000c Pre.book


· Assist Gas Option (Process Gas 2) Input
The coolant water inputs and control air input are located in the
bottom rear-center of the LMT system:
· Inlet from Chiller- ¾" (19.05 mm) tubing
· Outlet to Chiller - ¾" (19.05 mm) tubing
Figure 1-4. META Platform Front and…

00 E-250 Pre.book

00 E-250 Pre.book

…] Chiller installed and operational (loop test OK)
[ ] Coolant is a mixture of water and corrosion inhibitor
[ ] 30 µm particle filter installed at laser head inlet
[ ] Shut-off valves installed (optional, recommended)
[ ] 3/8" minimum ID hose between the laser system and chiller

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

…25% duty cycle.
8 At 10 kHz PRF, maximum duty cycle operation.
9 See manual for details.
10 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
11 Do not operate at or below dew…

COHR DIAMOND E-1000 DS 0817 1.pdf

COHR DIAMOND E-1000 DS 0817 1.pdf

…the waist location, located at approximately 5m from the laser output.
8 See manual for details.
9 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
10 Do not operate at or below dew…

COHR DiamondJ-2 DS 0518 2.pdf

COHR DiamondJ-2 DS 0518 2.pdf

…28% duty cycle.
8 At 10 kHz PRF, maximum duty cycle operation.
9 See manual for details.
10 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
11 Do not operate at or below dew…

COHR DIAMOND J-3 DS 0617 1.pdf

COHR DIAMOND J-3 DS 0617 1.pdf

…25% duty cycle.
8 At 10 kHz PRF, maximum duty cycle operation.
9 See manual for details.
10 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
11 Do not operate at or below dew…

COHR DIAMOND J-5 DS 1117 1.pdf

COHR DIAMOND J-5 DS 1117 1.pdf

…18% duty cycle.
8 At 10 kHz PRF, maximum duty cycle operation.
9 See manual for details.
10 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
11 Do not operate at or below dew…

COHR DIAMOND E-1000 DS 1118 1.pdf

COHR DIAMOND E-1000 DS 1118 1.pdf

…the waist location, located at approximately 5m from the laser output.
8 See manual for details.
9 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
10 Do not operate at or below dew…

COHR DiamondJ-5 DS 0119 1.pdf

COHR DiamondJ-5 DS 0119 1.pdf

…18% duty cycle.
8 At 10 kHz PRF, maximum duty cycle operation.
9 See manual for details.
10 This differential pressure is from system input to output and does not include the pressure drop from chiller fittings and the supply and return hose.
11 Do not operate at or below dew…