Search Results

1 - 12 of 45 Products for 'Water Filter' Page 1 of 4 |

Water Filter

00 Laser Cooling.book

00 Laser Cooling.book

…path. A filter is an inexpensive way to
eliminate them.
Water filters are rated according to the largest particle size that
can pass through them.
6. Use water that is neither too acidic (pH <6) nor too basic
(pH >8). If you are unsure of the pH of your water, have it…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

HighLight DL Series | Fiber Coupled Diode Laser Series for Laser Welding, Cladding, more

HighLight DL Series | Fiber Coupled Diode Laser Series for Laser Welding, Cladding, more

…technology with highest energy efficiency
* Versatile and robust production tool due to wide range processing optics
* Cooling with clean and filtered tap water Applications
* Laser cladding
* Heat treatment
* Laser brazing
* 2D/3D additive manufacturing
* Laser welding
* Laser hardening
* Keyhole…

AVIA NX nanosecond laser

AVIA NX nanosecond laser

…lasers than anyone else. And we know more about optics failure mechanisms in these lasers. So while some competitors still use an external “pump and filter” approach to try and purge these optics, AVIA NX all use our PureUV™ active laser cleaning engine. This means the laser is truly sealed with an…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual
24
2. Remove the top cover (Figure 8).
3. Remove the water hose/filter kit, if provided (see Figure 9).
Figure 8. Top Cover Removed
Figure 9. Water Hoses and Filter Removal (if provided)

00 E-250 Pre.book

00 E-250 Pre.book

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Figure 3-1.…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the supply and return lines are recommended to
facilitate maintenance to the cooling system filters and laser system.
Coolant…