Search Results

1 - 12 of 16 Products for 'X Y Stages' Page 1 of 2 |

X Y Stages

UW180 Universal Laser Workstation

UW180 Universal Laser Workstation


* Compact footprint
* Manual Z-axis, internal adjustment
* 17” Flat screen monitor with flex-arm screen
* 12” x 12” X-Y stages with stepping motors, programable
* Work envelope, 30"W x 30"D (height is lens dependent)
* Options: Rotary Axis Datasheet UW Series Features & Benefits UW180 Processing…

GeoLasHD excimer ablation laser system

GeoLasHD excimer ablation laser system

…with micron resolution Multi-format sample cell with fast washout time to deliver stable and assignable ICP-MS signals Sub-micron precision x-y-z stage and bidirectional control of mass spectrometer to provide the highest process control UV Excimer System for LA-ICP-MS - Using 193 nm produces…

Biosafety Level 3 setup for multiphoton microscopy in vivo

Biosafety Level 3 setup for multiphoton microscopy in vivo

…measure of system performance, we used either the speed of acquisition to address the impact
of the class III BSC on the movement of the stage in x, y and z axis, or calculated the Structural SIMilarity (SSIM)
index29 between the maximal intensity projection of the first 3D stack and each…

CMM 11.1.indd

CMM 11.1.indd

…fixed beam tube cutter uses fixed optics
to deliver the focused beam to the
workpiece mounted to a moving stage
with four axes of motion, three translation
(X, Y, Z) and one rotation. The system
allows for kerf cutting of tube stock or flat
stock material with micron…

UW Series 09-19-14 .cdr

UW Series 09-19-14 .cdr

…devices accommodated as options
! 180 x 180mm mark field size standard; 120 x 120mm option
UW-180 Version: Includes all standard features shown, plus:
! 12" x 12" X-Y stages with stepping motors, programmable
! Work envelope, 30"W x 30"D (height is lens dependent)
! Options:…

EU LTJ Ultrashort Pulses Improving the Process.pdf

EU LTJ Ultrashort Pulses Improving the Process.pdf

…determined that a workstation employing high speed, motorized, x-y stages for part positioning would be required in order to meet the processing time requirements. The task was then to systematically optimize the laser beam and stage performance one parameter at a time, measuring the actual cutting…

Improving and Quantifying the Process Window

Improving and Quantifying the Process Window

…determined that a workstation employing high speed, motorized, x-y stages for part positioning would be required in order to meet the processing time requirements. The task was then to systematically optimize the laser beam and stage performance one parameter at a time, measuring the actual cutting…

2016-Ultrafast-Laser-Systems-Catalog.pdf

2016-Ultrafast-Laser-Systems-Catalog.pdf

…pre-pulse. Pulse energy specification must be decreased by 20% when optional
Pulse slicer is added.
8 M2 deviation is less than 0.2 between X to Y after compression.
9 Pump laser must be qualified for compatibility with Hidra requirements by Coherent. Contact the factory for further…

COHR RLScatalog 2017revA web.pdf

COHR RLScatalog 2017revA web.pdf

…pre-pulse. Pulse energy specification must be decreased by 20% when optional
Pulse slicer is added.
8 M2 deviation is less than 0.2 between X to Y after compression.
9 Pump laser must be qualified for compatibility with Hidra requirements by Coherent. Contact the factory for further…

Microsoft Word - 5694-20 submitted.doc

Microsoft Word - 5694-20 submitted.doc

stage is 0.01o,
which gives 4.1cm-1 (~0.125nm at 550nm) spectral resolution. The real spectral resolution is determined by the used
scanning step. For example, a scanning step of 0.8 degree corresponds to about 330cm-1 resolution (~10nm at 550nm).
The spatial resolution along x

Comparative-study-of-in-situ-N2-rotational-Raman-spectroscopy-methods-for-probing-energy-thermalisation-processes-during-spin-exchange-optical-pumping.pdf

Comparative-study-of-in-situ-N2-rotational-Raman-spectroscopy-methods-for-probing-energy-thermalisation-processes-during-spin-exchange-optical-pumping.pdf


(Fig. 1a), contributions from Rayleigh scattering and the
probe laser are minimised by exciting and detecting along
different axes (x and y, respectively), as well as spatially
filtered by the internal baffles of the Raman spectrometer.
However, sub-mm3 accuracy is needed…

COHR Hidra DS 0317 2 FINAL.pdf

COHR Hidra DS 0317 2 FINAL.pdf

…pre-pulse. Pulse energy specification must be decreased by 20% when optional Pulse slicer is added.
8 M2 deviation is less than 0.2 between X to Y after compression.
9 Pump laser must be qualified for compatibility with Hidra requirements by Coherent. Contact the factory for further…