---

1.    TechBrief_DPSS_Micromach_Lasertec  (PAGE 2 OF 2) ... ) pulseto-pulse stability, which is another factor contributing to the 50 percent improvement in observed surface quality as well as improved contour accuracy (see Figure 2). In addition, prior experience indicated that for a given laser power, superior surface quality and process control are obtained ... Related Searches: prisma

2.    EnergyMaxGuide_revA_12_Final  (PAGE 7 OF 20) ... spectral scans performed on each sensor disk (and on each optic if the sensor has a diffuser).The spectral compensation provides greater measurement accuracy for wavelengths that differ from the optical calibration wavelength. Model Wavelength (m) 0.1 1 10 J-10SI-HE & -LE 0.325 to 0.9 J-10GE 0.8 ...

3.  FieldMaxII-TO ... Laser Applications Used Holography Printing and Digital Imaging Optics Inspection Spectroscopy Large, bright, backlit LCD display Digital accuracy with analog-like movement for laser tuning Works with thermopile and optical sensors only  USB computer interface with complete host control capability ... Related Searches: fieldmax to | field max | labview drivers

4.  Three-Dimensional Structuring with UV Excimer Lasers ... scanning, next to three-dimensional spherical shapes also cylindrical shapes and various arbitrary shapes are achievable with a high degree of accuracy. Fig. 1 - Three dimensional lenslet structure excimer laser machined in polymer foil. Click on image for larger view. Fig. 2 - 3D feature sliced into ...

5.    FUN_12_R_DELMDAHL_revised  (PAGE 1 OF 4) ... lasers will be compared with frequency converted Nd:YAG lasers. Both quality and longevity of the deposited layers strongly depend on the degree of accuracy achieved in the thin film ablation and subsequent deposition process. 1 Introduction High pulse energy excimer lasers with pulse energies between ...

6.    pdf_126  (PAGE 6 OF 12) ... Interferometer, Appl. Opt. Vol 23, pp 4403-4409 (1983) [4] G. W. R. Leibbrandt, G. Habers and P. J. Kunst "Wave-front analysis with high accuracy by use of a double-grating lateral shearing interferometer", Appl. Opt. 35, 6151-6161 (1996) [5] H. Schreiber and J. Schwider, "Lateral Shearing ... Related Searches: interferometer

7.    Talisker_1064-18_DS_final Best match in this PDF  |  All matches in this PDF ... Beam Diameter (mm) 2 ±25% Beam Circularity >85% Warm-Up Time (typical) <15 minutes from standby mode <45 minutes from cold start Bore-Sight Accuracy ±0.5 mm and ±5 mrad referenced to mounting features on laser head Single-Phase Operating Voltage (VAC) 100 to 240 Laser Power Consumption 50 to ... Related Searches: talisker ultra

8.    HighRep-RateExcimerLasersforMicromachingRev2 Best match in this PDF  |  All matches in this PDF ... offers new possibilities also for micromachining. It is ideal for micro applications which require high precision patterning - with a positional accuracy of below 50 microns - at high volume throughput. In this process the laser energy dose may be built up in several shots, UV lasers with several hundred ... Related Searches: coherence length

9.    2002%20AR  (PAGE 29 OF 93) ... changes, new reporting responsibilities for internal controls, and requires our Chief Executive Officer and Chief Financial Officer to certify the accuracy of filed reports. The various provisions of the Act have phase-in provisions and become effective at different times in the future. Subsequent to ...

10.    Talisker_355-4_DS_final Best match in this PDF  |  All matches in this PDF ... ) 1 ±25% 0.7 ±25% 0.6 ±25% Beam Circularity >85% Warm-Up Time (typical) <15 minutes from standby mode <45 minutes from cold start Bore-Sight Accuracy ±0.5 mm and ±5 mrad referenced to mounting features on laser head Single-Phase Operating Voltage (VAC) 100 to 240 Laser Power Consumption (Hz ... Related Searches: talisker ultra

---

Page 1 2 3 4 5 6 7 8 9 10 11>> of 72 | Next

Site Search by

Coherent Contact Information