Ask a Question
Coherent

Search Results

25 - 36 of 250 Products for 'alignment targets' Page 3 of 21 |

alignment targets

ModeMaster PC User Manual

ModeMaster PC User Manual

…(adjusts the scan head so the input beam is parallel with the scan head optical axis) and the dot and circle both to the center of the alignment target (adjusts scan head so the input beam is on its optical axis). 5. The micrometer adjustments controlling the translation and angular adjustment…

Book.book

Book.book

…Tuning Chart .......................................................................................................24 Alignment Target Chart ......................................................................................25 Synchronized Trending…

ModeMaster PC User Manual

ModeMaster PC User Manual

…(adjusts the scan head so the input beam is parallel with the scan head optical axis) and the dot and circle both to the center of the alignment target (adjusts scan head so the input beam is on its optical axis). 5. The micrometer adjustments controlling the translation and angular adjustment…

Book.book

Book.book

…this large panel to display the alarm settings. Home Screen--The Home screen displays live power and position information simultaneously. The Alignment target displays the beam position relative to the detector aperture. Power values display with selected units and settings. The Statistics panel…

Book.book

Book.book

…input end of the instrument. The zero offsets of the alignment targets are calibrated at the factory so that the pinholes cross the beam at a scan head azimuth angle of 45°. Other azimuth angles will result in a less precise initial pinhole alignment. Spin Axis of drum Y Knife Edge Axis X Knife Edge…

ModeMaster PC User Manual

ModeMaster PC User Manual

…input end of the instrument. The zero offsets of the alignment targets are calibrated at the factory so that the pinholes cross the beam at a scan head azimuth angle of 45°. Other azimuth angles will result in a less precise initial pinhole alignment. Spin Axis of drum Y Knife Edge Axis X Knife Edge…

ModeMaster PC User Manual

ModeMaster PC User Manual

…input end of the instrument. The zero offsets of the alignment targets are calibrated at the factory so that the pinholes cross the beam at a scan head azimuth angle of 45°. Other azimuth angles will result in a less precise initial pinhole alignment. Spin Axis of drum Y Knife Edge Axis X Knife Edge…

Book.book

Book.book

…and numerical area of the Alignment Screen when the Alignment Zoom option is engaged: A. Current azimuth angle of the ModeMaster PC Scan Head. B. Resolution of the current alignment screen (resolutions of 1x 2x, 4x, 8x, and 16x are available). C. Fixed alignment target. The user may adjust the scan…

ModeMaster PC User Manual

ModeMaster PC User Manual

…and numerical area of the Alignment Screen when the Alignment Zoom option is engaged: A. Current azimuth angle of the ModeMaster PC Scan Head. B. Resolution of the current alignment screen (resolutions of 1x 2x, 4x, 8x, and 16x are available). C. Fixed alignment target. The user may adjust the scan…

ModeMaster PC User Manual

ModeMaster PC User Manual

…and numerical area of the Alignment Screen when the Alignment Zoom option is engaged: A. Current azimuth angle of the ModeMaster PC Scan Head. B. Resolution of the current alignment screen (resolutions of 1x 2x, 4x, 8x, and 16x are available). C. Fixed alignment target. The user may adjust the scan…

Book.book

Book.book

…within the alignment target on the screen (see following figure). The larger fixed target circle on the Live/Alignment screen represents the approximate outer diameter of the input lens of the scan head. The smaller inner fixed circle represents the approximate region the beam must be aligned within…

Book.book

Book.book

…This value updates each time a new zoom setting is selected. Absolute/Relative Button--The mode setting is displayed to the upper left of the Alignment Target. The button displays the mode not currently active. Absolute mode displays data relative to the center of the detector aperture. The relative…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions