Search Results

13 - 24 of 107 Products for 'aperture' Page 2 of 9 |
Related Categories: Obis | Obis 488 | Obis 637 Lx | Obis 532 Ls | 488 Nm Laser

aperture

Book.book

Book.book

…& 1040.11 EXCEPT
FOR DEVIATIONS PURSUANT TO LASER
NOTICE NO. 50, DATED JULY 26, 2001
CLOSED OPEN
SHUTTER
LASER APERTURE
Part Number / Revision
Wavelength / Power
Maximum Power
Serial Number
Date Manufactured
LASER RADIATION
AVOID…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

…Labels.................................................................................... 1-4
2-1. Laser Beam Exit Aperture View (Standard and Separate Driver Options) ..................... 2-1
2-2. Control Panel…

Vitara Preinstall.book

Vitara Preinstall.book

…Manual
1 - 10
Figure 1-6. Safety Label Locations on the Vitara Controller
1. Avoid Exposure to Laser Beam Emitted from Aperture
2. Exposure to Laser Radiation When Interlock Defeated
LASER
EMISSION
3. Laser Emission (Silk Screen) for System Emission…

OBIS Galaxy Datasheet COHR 2018.pdf

OBIS Galaxy Datasheet COHR 2018.pdf

…End - Input
MECHANICAL SPECIFICATIONS
FC/APC
Distal End - Output
FC Connector Key
Polarization
±2° Max.
Laser Aperture
Polish Direction
Not Applicable to
FC/UFC Connector
View of Fiber from
Connector End
3 mm PVC
Coated Monocoil…

COHR ExcimerCatalog2019.pdf

COHR ExcimerCatalog2019.pdf

…(mm) 5 x 5 10 x 10 20 x 20
Zoom (%) ±10 ±10 ±10
Homogeneity (%) <±5 <±5 <±5
Field Position Entrance Aperture Entrance Aperture Entrance Aperture
Approx. 600 mm after Homogenizer Exit
(depending on wavelength)
32 x 32 mm,
overall size entrance-exit

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual
4 - 14
Aperture Area
This command sets the aperture area, expressed in square centimeters (cm2).
Command: CONFigure:AREA:APERture {0.01..500.00}
Default is 1.0
Query: CONFigure:AREA:APERture?
Reply: 0.01..500.00
Analog Output Full…

ModeMaster PC User Manual

ModeMaster PC User Manual

…convert its knife edge-measured results to those that would be
obtained by the other methods.
The variable aperture diameter (for a round beam) is the circular
aperture diameter, which when centered on the centroid of the beam,
transmits 86.5% of the beam. It is also called the…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…-
DO NOT STARE INTO BEAM
27650 SW 95TH AVENUE, WILSONVILLE, OR 97070
AVOID EXPOSURE - LASER RADIATION
IS EMITTED FROM THIS APERTURE
(See manual before servicing, safety class may change)

*
* DO NOT REMOVE OPTICS
*
*
CAUTION
Complies with 21 CFR 1040.10(a)(2)…

COHR HELIOS DS 0217 3.pdf

COHR HELIOS DS 0217 3.pdf

…Pulse
1.5 mJ/0.3-2 ns
0.8 mJ/0.3-2 ns
0.1 mJ/0.3-2 ns
MECHANICAL SPECIFICATIONS
HELIOS Datasheet
Laser Aperture
Laser Aperture
128 mm (5.04 in.)
257 mm (10.12 in.)
128 mm (5.04 in.)
55.5 mm
(2.19 in.)
83.9 mm
(3.30 in.)
104…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…be mounted in any orientation. If mounted
vertically with the beam tube up, ensure no dust or other particulates
fall into the output aperture during installation.
NOTICE!
Customers mounting the laser in a 'non-horizontal' feet down
configuration are responsible for properly…

PowerMax-USB-RS-Sensors-Product-Guide.pdf

PowerMax-USB-RS-Sensors-Product-Guide.pdf

…Features
· Convective air-cooled
· Spectrally flat from 0.19 m to 11 m
· Noise equivalent power down to 0.2 mW
· 19 mm aperture
Models PM2, PM10, PM30
These thermopile sensors are used to measure CW and pulsed lasers from
5 mW up to 30W average power output.These…

COHR PowerMax-Pro kW DS 0417 5 FINAL.pdf

COHR PowerMax-Pro kW DS 0417 5 FINAL.pdf

…mm
(0.2 in.)
50.8 mm
(2.0 in.)
56.95 mm
(2.24 in.)
26.76 mm
(1.05 in.)
41.71 mm
(1.64 in.)
Open Aperture
(Element is 57 mm
from Front Plate)
2X M4 x 0.7 Int. Thread (4.0 mm
8.13 mm (0.32 in.)
9
91.69 mm (3.61 in.)

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions