Search for Lasers, Laser Systems, Laser Measurment, Laser Service Coherent Inc., Worldwide websites Coherent Inc., calendar of events Coherent Inc., office locator Coherent Inc., Service Centers
     > Search
Search Coherent
Coherent Inc.
Superior Reliability & Performance
  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
Please enter a search phrase.

1 - 10 of 24 Search Results for avia 10w
Search Suggestions: avia 355 | matrix | avia 355 10 | q-switch | picosecond laser | evolution 30 | 1064 nm laser | 1064 | prisma | pulsed uv laser

1pdf document  AVIA_355-10_DS_final Best match in this PDF  |  All matches in this PDF
AVIA 355-10 Solid-State Q-Switched Ultraviolet Lasers Superior Reliability & Performance Mechanical Specifications Laser Head Power Supply Features 10W of 355 nm at 60 kHz Excellent beam quality PermAlignTM solder-bonded optics technology Ultra-long life AAATM (Aluminum-free Active Area) laser ...
Related Searches: avia 355 10 | avia 355

2Pulsed Q-Switched
... modules.We offer picosecond pulsed lasers operating in the 200 kHz repetition rate range covering the infrared, visible and ultraviolet spectrum. AVIA is a family of ultraviolet and green high-power, diode-pumped, Q-switched lasers, available with average power ranging from 1W to >30W. Ideal for ...
Related Searches: q-switch | picosecond laser | evolution 30 | 1064 nm laser

3pdf document  AVIA-X_DS_dis  (PAGE 1 OF 2)
... Repetition Rate Single-shot to 100 kHz Pulse Width <30 ns up to 60 kHz Pulse-to-Pulse Stability <5% rms up to 60 kHz Average Output Power >10W @ 60 kHz Polarization Ratio >100:1 horizontal Warm-up Time <10 minutes Spatial Mode TEM00 (M2 <1.3) Beam Divergence <0.3 mrad Beam Diameter ...
Related Searches: avia x | 355 nm

4pdf document  AVIA-X_DS_dis Best match in this PDF  |  All matches in this PDF
... Repetition Rate Single-shot to 100 kHz Pulse Width <30 ns up to 60 kHz Pulse-to-Pulse Stability <5% rms up to 60 kHz Average Output Power >10W @ 60 kHz Polarization Ratio >100:1 horizontal Warm-up Time <10 minutes Spatial Mode TEM00 (M2 <1.3) Beam Divergence <0.3 mrad Beam Diameter ...
Related Searches: avia x | avia 355 x

5pdf document  AVIA_355-10_DS_final  (PAGE 1 OF 2)
AVIA 355-10 Solid-State Q-Switched Ultraviolet Lasers Superior Reliability & Performance Mechanical Specifications Laser Head Power Supply Features 10W of 355 nm at 60 kHz Excellent beam quality PermAlignTM solder-bonded optics technology Ultra-long life AAATM (Aluminum-free Active Area) laser ...

6Precision Engraving of Silicon Wafers
... Cladding Cutting and Scribing Drilling Heat Treating Marking and Engraving Sub-Surface Modification Surface Modification Welding and Soldering AVIA Family of DPSS Lasers - AVIA is a family of diode-pumped, solid-state, Q-switched lasers, offered at wavelengths of 532 nm, 355 nm and 266 nm, with output ...
Related Searches: silicon cutting

7pdf document  Solar_brochure_12 Best match in this PDF  |  All matches in this PDF
... P1 (below) and P3 (right) layer patterning in a-Si thin-film panels Talisker and Paladin lasers offer picosecond pulses in the IR, Green, and UV AVIA LAMBDA SX Talisker Paladin PRISMA FAP System MATRIX Crystalline-Silicon Edge Isolation · Laser Grooved Buried Contacts · Texturing · · · Selective Ablation ...
Related Searches: solar cell cutting | solar cell isolation | dopant diffusion | glass drilling

8pdf document  AVIA_355-10_DS_final  (PAGE 2 OF 2)
... ) Weight of Laser Head 26.0 kg (57 lbs.) Weight of Power Supply 38.6 kg (85 lbs.) Umbilical Length 3m (10 ft.) Utility and Environmental Requirements AVIA 355-10 Power Curve AVIATM 355-10 Solid-State Q-Switched Ultraviolet Lasers 1 Measured with the laser optimized at 60 kHz and 10W unless otherwise ...

9pdf document  Semi_LasersTargetChipFabricationRev2  (PAGE 3 OF 3)
... . Tripled solid-state Nd3+ lasers cannot match the output power of CO2 sources, but that has become less of a drawback as wafers become thinner. The 10-W average power at 355 nm produced by a diode-pumped solid-state laser -- for example, Coherent's Avia 355-X -- is more than adequate to cut 200-m-thick ...

10pdf document  Matrix355final  (PAGE 2 OF 2)
... - Wavelength (nm); 1 - Specified Power (W); 60 - Specified PRF (kHz). 3 355 - Wavelength (nm); 1.5 - Specified Power (W); 70 - Specified PRF (kHz). 4 AVIA Ultra 2000 compatible beam parameters through internal beam expander (BE). 5 Recommended range: 20 to 80 kHz. Coherent follows a policy of continuous ...


Page 1 2 3 of 3 | Next


Site Search by  Site Search powered by SLI Systems