1 - 10 of 14 Search Results for avia 7000
|
|
|
3.
Pulsed Q-Switched
|
|
... , Evolution delivers high average power (>90W at 5 kHz) or high energy-per-pulse (up to 45 mJ at 1 kHz) with a flat-top symmetrical beam profile. AVIA is a family of ultraviolet and green high-power, diode-pumped, Q-switched lasers, available with average power ranging from 1W to >30W. Ideal for ...
Related Searches: nd ylf | 1064 nm laser | q-switch | picosecond laser
|
|
|
|
|
4.
AVIA Legacy Products
|
|
20W at 355nm, 266nm, and 532nm. "> AVIA Legacy Products Locate the replacement product for AVIA models no longer in production Key AVIA Advantages Maximum Uptime and Availability Better Performance by Design Manufactured to Meet Your Requirements Global Service and Support Discontinued Models ...
Related Searches: avia 355-3000 | avia ultra 355-2000 | avia 266 | avia 355-7000
|
|
|
|
|
5.
Polyimide Film Cutting with DPSS Lasers
|
|
... cutting with good cut quality at speeds of up to 75 mm/sec was demonstrated. Laser Used: Nd:YV04 Process: All processing was performed using the AVIA 355-7000 q-switched, diode-pumped, solid-state laser. Laser parameters were 80-kHz repetition rate, 25-ns pulse duration, 94-µJ pulse energy and 7.6W ...
Related Searches: cutting | avia 355-7000 | glass cutting | laser cutting
|
|
|
|
6.
Avia_355-355X_Preinstallation
(PAGE 8 OF 38)
|
|
|
AVIA 355/AVIA 355-X Laser Preinstallation Manual 2 circuit should be equivalent to a mechanical closure of the circuit. Under no circumstances should an external voltage or current source be connected to this circuit. External interlock circuitry should be isolated from all other electrical circuits ...
|
|
|
|
|
7.
Pulsed Q-Switched
|
|
... Systems Energies >45 mJ/pulse; rep. rates 1-350 kHz; wavelengths in the IR, VIS, & UV. Pulsed Q-Switched Featured Lasers: Talisker MATRIX AVIA PRISMA Coherent has a pulsed solid-state laser to meet your most exacting requirements. We provide Q-switched systems with energies in excess of >45 ...
Related Searches: uv 355 | laser 1064nm | dpss 532 | 355 nm
|
|
|
|
|
8.
Avia_355-355X_Preinstallation
(PAGE 11 OF 38)
|
|
... Environmental Requirements PARAMETER REQUIREMENT Ambient operating temperature 10ºC to 35°C (50 to 95°F)[1] Water cooled base plate required for 355-7000 and 355-X Relative humidity 5 to 90% (non-condensing) Altitude Sea level to 10,000 feet (3,000 m) Note: All specifications and requirements are subject ...
Related Searches: avia 355-7000 | avia-x
|
|
|
|
|
10.
ITO Ablation on Glass Substrates with DPSS Lasers
|
|
... Cladding Cutting and Scribing Drilling Heat Treating Marking and Engraving Sub-Surface Modification Surface Modification Welding and Soldering AVIA Family of DPSS Lasers - AVIA is a family of diode-pumped, solid-state, Q-switched lasers, offered at wavelengths of 532 nm, 355 nm and 266 nm, with output ...
Related Searches: avia 355-7000 | ablation | avia355 | ito
|
|
Coherent Contact Information