1 - 10 of 297 Search Results for avia x
|
|
|
3.
AVIA-X_DS_dis.pdf
(PAGE 2 OF 2)
|
|
…nm
30 kW PEAK, 5 W AVERAGE
Average Power
AveragePower(W)
Repetition Rate (kHz)
0.0
0
2.0
4.0
6.0
10.0
8.0
12.0
100908070605040302010
Coherent follows a policy of continuous product improvement.
Specifications are subject to…
|
|
|
|
|
5.
Avia_preinstall.book
(PAGE 11 OF 38)
|
|
…-7000 and 355-X
Relative humidity 5 to 90% (non-condensing)
Altitude Sea level to 10,000 feet (3,000 m)
Note: All specifications and requirements are subject to change without notice.
[1] AVIA 355-X air-cooled power supply is limited to maximum 30ºC ambient air temperature
Table…
Related Searches: avia 355-7000 | avia
|
|
|
|
6.
AVIA-X DS dis
|
Best match in this PDF
|
All matches in this PDF
|
…Range 10 to 30°C (water-cooled) Dimensions of Laser Head (LxWxH) 799 x 203 x 195 mm (31.4 x 8 x 7.7 in.) Weight of Laser Head 25.4 kg (56 lb) Dimensions of Laser Power Supply (LxWxH) 452 x 434 x 254 mm (17.8 x 17.1 x 10.0 in.) Weight of Laser Power Supply 38.6 kg (85 lb) Umbilical Length 3 m (10 ft) Umbilical…
Related Searches: avia 355 x | avia
|
|
|
|
|
7.
Avia_preinstall.book
(PAGE 5 OF 38)
|
|
Preface
v
Preface This manual contains preinstallation information for the
AVIA 355/355-X Diode-Pumped Laser.
Read the operator's manual carefully before operating the laser
for the first time. Special attention should be given to Section
One, Laser Safety, within the operator's…
Related Searches: avia | avia 355 operator manual
|
|
|
|
|
8.
AVIA-X_DS_dis.pdf
(PAGE 1 OF 2)
|
|
…Ambient Temperature Operating Range 10 to 30°C (water-cooled)
Dimensions of Laser Head (LxWxH) 799 x 203 x 195 mm (31.4 x 8 x 7.7 in.)
Weight of Laser Head 25.4 kg (56 lb)
Dimensions of Laser Power Supply (LxWxH) 452 x 434 x 254 mm (17.8 x 17.1 x 10.0 in.)
Weight of Laser Power Supply…
Related Searches: avia 355 x
|
|
|
|
|
9.
Avia_preinstall.book
(PAGE 26 OF 38)
|
|
AVIA 355/AVIA 355-X Laser Preinstallation Manual
20
PULSE MODE=n
PM=n
Sets the pulse mode.
n = 0 in continuous mode.
n = 1 is burst mode.
n = 2 is CW alignment mode.
REPRATE=nnnnnn
RR=nnnnnn
Sets the repetition rate in Hz.
Allowable values: 3 to…
|
|
|
|
|
10.
Avia_preinstall.book
(PAGE 26 OF 38)
|
|
AVIA 355/AVIA 355-X Laser Preinstallation Manual
20
PULSE MODE=n
PM=n
Sets the pulse mode.
n = 0 in continuous mode.
n = 1 is burst mode.
n = 2 is CW alignment mode.
REPRATE=nnnnnn
RR=nnnnnn
Sets the repetition rate in Hz.
Allowable values: 3 to…
Related Searches: shg thg
|
|
