Ask a Question
Coherent

Search Results

25 - 36 of 40 Products for 'avia 355 operator manual' Page 3 of 4 |
Related Categories: Avia | Avia 355 X

avia 355 operator manual

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Operator's Manual ii This document is copyrighted with all rights reserved. Under the copyright laws, this document may not be copied in whole or in part or reproduced in any other media without the express written permission of Coherent, Inc. Permitted copies must carry…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 26 PRINT LASER ROD SERVO STATUS ?LRSS Returns the status of the laser rod temperature servo: 0 if the servo is OPEN. 1 if the servo is LOCKED. 2 if the servo is SEEKING. 3 if the servo has a FAULT. PRINT LASER ROD SET TEMP ?LRST Returns laser rod set…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 26 PRINT LASER ROD SERVO STATUS ?LRSS Returns the status of the laser rod temperature servo: 0 if the servo is OPEN. 1 if the servo is LOCKED. 2 if the servo is SEEKING. 3 if the servo has a FAULT. PRINT LASER ROD SET TEMP ?LRST Returns laser rod set…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 26 PRINT LASER ROD SERVO STATUS ?LRSS Returns the status of the laser rod temperature servo: 0 if the servo is OPEN. 1 if the servo is LOCKED. 2 if the servo is SEEKING. 3 if the servo has a FAULT. PRINT LASER ROD SET TEMP ?LRST Returns laser rod set…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 10 Table 4. EXTERNAL INTERLOCK/CHILLER Connector Pinouts THIS CONNECTOR IS A DA-15 PIN FEMALE (PLUG WITH SOCKETS) CONNECTOR. PIN DESCRIPTION FUNCTION 1 Emission lamp relay contact Output signal (pins 1 and 2) used to determine the Laser Emission Lamp…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 10 Table 4. EXTERNAL INTERLOCK/CHILLER Connector Pinouts THIS CONNECTOR IS A DA-15 PIN FEMALE (PLUG WITH SOCKETS) CONNECTOR. PIN DESCRIPTION FUNCTION 1 Emission lamp relay contact Output signal (pins 1 and 2) used to determine the Laser Emission Lamp…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 10 Table 4. EXTERNAL INTERLOCK/CHILLER Connector Pinouts THIS CONNECTOR IS A DA-15 PIN FEMALE (PLUG WITH SOCKETS) CONNECTOR. PIN DESCRIPTION FUNCTION 1 Emission lamp relay contact Output signal (pins 1 and 2) used to determine the Laser Emission Lamp…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 30 PRINT MODE1 RAMP SLOPE ?RS1 Returns the Pulse Delete Ramp Slope percentage (RS1) for the Pulse Delete mode (MODE1) of operation. PRINT MODE2 RAMP SLOPE ?RS2 Returns the ThermEQ Ramp Slope percentage (RS2) for the ThermEQ, PulseEQ, and PulseTrack…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 30 PRINT MODE1 RAMP SLOPE ?RS1 Returns the Pulse Delete Ramp Slope percentage (RS1) for the Pulse Delete mode (MODE1) of operation. PRINT MODE2 RAMP SLOPE ?RS2 Returns the ThermEQ Ramp Slope percentage (RS2) for the ThermEQ, PulseEQ, and PulseTrack…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 30 PRINT MODE1 RAMP SLOPE ?RS1 Returns the Pulse Delete Ramp Slope percentage (RS1) for the Pulse Delete mode (MODE1) of operation. PRINT MODE2 RAMP SLOPE ?RS2 Returns the ThermEQ Ramp Slope percentage (RS2) for the ThermEQ, PulseEQ, and PulseTrack…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 2 circuit should be equivalent to a mechanical closure of the circuit. Under no circumstances should an external voltage or current source be connected to this circuit. External interlock circuitry should be isolated from all other electrical circuits…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 2 circuit should be equivalent to a mechanical closure of the circuit. Under no circumstances should an external voltage or current source be connected to this circuit. External interlock circuitry should be isolated from all other electrical circuits…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions