Ask a Question
Coherent

Search Results

25 - 36 of 95 Products for 'avia 355 x' Page 3 of 8 |
Related Categories: Uv | Matrix 355 | Avia 355nm | Uv Dpss Laser | Uv Ns

avia 355 x

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 4 Umbilical Bend Radius Ensure the umbilical has a bend radius of 5 inches or greater. Excessively tight fiber bends (less than a 5 inch radius) can cause permanent damage. Installation Procedures After installing the laser head and power supply in…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 4 Umbilical Bend Radius Ensure the umbilical has a bend radius of 5 inches or greater. Excessively tight fiber bends (less than a 5 inch radius) can cause permanent damage. Installation Procedures After installing the laser head and power supply in…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 4 Umbilical Bend Radius Ensure the umbilical has a bend radius of 5 inches or greater. Excessively tight fiber bends (less than a 5 inch radius) can cause permanent damage. Installation Procedures After installing the laser head and power supply in…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 16 ECHO Mode The AVIA 355 provides an echo mode in which each character transmitted to the laser is echoed to the host. This feature can be turned on or off using the ECHO command (refer to Table 11). PROMPT Mode The AVIA 355 provides an prompt mode…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 16 ECHO Mode The AVIA 355 provides an echo mode in which each character transmitted to the laser is echoed to the host. This feature can be turned on or off using the ECHO command (refer to Table 11). PROMPT Mode The AVIA 355 provides an prompt mode…

Avia preinstall.book

Avia preinstall.book

AVIA 355/AVIA 355-X Laser Preinstallation Manual 16 ECHO Mode The AVIA 355 provides an echo mode in which each character transmitted to the laser is echoed to the host. This feature can be turned on or off using the ECHO command (refer to Table 11). PROMPT Mode The AVIA 355 provides an prompt mode…

Avia preinstall.book

Avia preinstall.book

…and requirements are subject to change without notice. [1] AVIA 355-X air-cooled power supply is limited to maximum 30ºC ambient air temperature Table 3. Dimensions and Weights POWER SUPPLY LASER HEAD UMBILICAL LENGTH 45.2 cm (17.8 in) AVIA 76.2 cm (30.0 in) AVIA-X 79.9 cm (31.4 in) 3 meters (10…

Avia preinstall.book

Avia preinstall.book

…and requirements are subject to change without notice. [1] AVIA 355-X air-cooled power supply is limited to maximum 30ºC ambient air temperature Table 3. Dimensions and Weights POWER SUPPLY LASER HEAD UMBILICAL LENGTH 45.2 cm (17.8 in) AVIA 76.2 cm (30.0 in) AVIA-X 79.9 cm (31.4 in) 3 meters (10…

Avia preinstall.book

Avia preinstall.book

…and requirements are subject to change without notice. [1] AVIA 355-X air-cooled power supply is limited to maximum 30ºC ambient air temperature Table 3. Dimensions and Weights POWER SUPPLY LASER HEAD UMBILICAL LENGTH 45.2 cm (17.8 in) AVIA 76.2 cm (30.0 in) AVIA-X 79.9 cm (31.4 in) 3 meters (10…

Avia preinstall.book

Avia preinstall.book

…PRINT UV POWER ?UP Returns the calibrated output UV average power in watts, or the word "External" if the system is in external trigger mode. PRINT X MOTOR POSITION ?MX Returns the X motor position for the crystal shifter X motor. Table 12. RS-232 Queries (Continued) QUERIES RETURNED INFORMATION

Avia preinstall.book

Avia preinstall.book

…PRINT UV POWER ?UP Returns the calibrated output UV average power in watts, or the word "External" if the system is in external trigger mode. PRINT X MOTOR POSITION ?MX Returns the X motor position for the crystal shifter X motor. Table 12. RS-232 Queries (Continued) QUERIES RETURNED INFORMATION

Avia preinstall.book

Avia preinstall.book

…PRINT UV POWER ?UP Returns the calibrated output UV average power in watts, or the word "External" if the system is in external trigger mode. PRINT X MOTOR POSITION ?MX Returns the X motor position for the crystal shifter X motor. Table 12. RS-232 Queries (Continued) QUERIES RETURNED INFORMATION

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions