Search Results

1 - 11 of 11 Products for 'avia 355' Page 1 of 1 |
  • 1

avia 355

AVIA 355-28 DS

AVIA 355-28 DS

40 mm (1.6 in.) 8.5 mm (0.33 in.) 155 mm (6.1 in.) 6 mm (0.24 in.) 288 mm (11.3 in.) 719.5 mm (28.3 in.) 620 mm (24.4 in.) 603 mm (23.7 in.) 301.5 mm (11.9 in.) 200 mm (7.9 in.) 216.5 mm (8.5 in.) 160.5 mm (6.3 in.) 87.4 mm (3.4 in.) 35 mm (1.4 in.) 49 mm (1.9 in.) STACCATO Ultra-Short Pulse Laser…

COHR AVIA LX UV DS 0818 3.pdf

COHR AVIA LX UV DS 0818 3.pdf

AVIA LX Solid-State Q-Switched Ultraviolet Lasers AVIA LX is a 20 W (at 355 nm) diode-pumped, solid-state, Q-switched nanosecond laser that offers an unmatched combination of high reliability, superior performance, and low cost of ownership. This is achieved, in part, through the use of the Coherent…

COHR AVIA NX UV DS 0117 5.pdf

COHR AVIA NX UV DS 0117 5.pdf

AVIA NX Datasheet
SPECIFICATIONS1 AVIA NX AVIA NX AVIA NX
355-20 355-25 355-30
Fundamental Center Wavelength (nm) 354.7 354.7 354.7
Output Power and Energy 20W, 200 µJ at 100 kHz 25W, 250 µJ at 100 kHz 30W, 250 µJ at 120 kHz
Repetition Rate Single-shot to 250 kHz…

COHR MATRIX355 DS 0317 2.pdf

COHR MATRIX355 DS 0317 2.pdf

…control
Input Power Requirements
Input Voltage (VAC) 90 to 240, 50 to 60 Hz
Input Power maximum typical
Power Supply (VA) 750 350
1 AVIA Ultra 2000 compatible beam parameters through internal beam expander (BE).
2 At specified rep. rate.
MATRIX 355 Datasheet

compatibility matrix 02

compatibility matrix 02

…Solid-State (pulsed)
AVIA (< 10 W) 266, 355 nm FieldMaxII-TO PM10X
AVIA (10 to 30 W) 355, 532 nm FieldMaxII-TO PM30X
AVIA NX (> 30 W) 355, 532 nm FieldMaxII-TO PM150
Daytona (discontinued 2014) 355 nm FieldMaxII-TO PM30X
Flare 355, 532, 1064 nm LabMax-TOP J-10MB-HE…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…Power Sensor
AVIA (<10W) 266, 355 FieldMaxII-TO PM10X
AVIA (10W to 30W) 355, 532 FieldMaxII-TO PM30X
AVIA (>30W) 532 FieldMaxII-TO PM150
Mamba Green, IR 532, 1064 FieldMaxII-TO PM1K
MATRIX 532, 1064 532, 1064 FieldMaxII-TO PM30
MATRIX 355 355 FieldMaxII-TO PM10X…

2009 LMCCatalog86.pdf

2009 LMCCatalog86.pdf

…PM30
Laser Wavelength (nm) Power Meter Power Sensor Energy Meter Energy Sensor
AVIA (<10W) 266, 355 FieldMaxII-TO PM10X - -
AVIA (10W to 30W) 355, 532 FieldMaxII-TO PM30X - -
AVIA (>30W) 532 FieldMaxII-TO PM150 - -
Indigo-DUV 193 FieldMaxII-TO PS10 3sigma J-10MT-10KHZ…

GUI 3.88 Revision History.pdf

GUI 3.88 Revision History.pdf

…the AVIA LX service triggering tab
AVIA LX:#303 - Store power meter readings in the laser if the laser supports this
Resolves AVIA LX:#291 - Add AVIA LX link to "Visit AVIA webpage" button
Resolves AVIA LX:#298 - Don't display seconds on charts in Singapore
Resolves AVIA LX:#149…

COHR MaterialsProcessingBrochure 0816revA 3.pdf

COHR MaterialsProcessingBrochure 0816revA 3.pdf

…thousands, the AVIA is the most widely
adopted high power Q-switched laser for materials processing.
This family of diode-pumped, solid-state products, is available in
wavelengths of 355 nm and 532 nm. Average powers to 40W and
repetition rates to 300's of kHz, means AVIA has a…

Laser Focus World - August 2016

Laser Focus World - August 2016

…material structuring
as potential applications. Consequently,
we invested considerable resources into
developing the AVIA. This was a UV (355
nm) DPSS laser that offered the combination of output power, reliability, and lifetime necessary for high-throughput commercial…

COHR PowerMax-Pro DS 0917 3.pdf

COHR PowerMax-Pro DS 0917 3.pdf

…Lasers of this type within the Coherent portfolio include the Matrix QS, Avia NX, Flare NX, Helios (the
regular "HD" models are not appropriate for these short pulsed, high energy lasers).
2 Contact Coherent for 355nm usage guidelines.
3 Water flow rate for water-cooled sensors must…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions