Search Results

1 - 11 of 11 Products for 'avia pulse width' Page 1 of 1 |
  • 1
Related Categories: Avia Nx 355 | Avia Nx 355-20

avia pulse width

Industrial Short-Pulse Lasers

Industrial Short-Pulse Lasers

…industrial ultra short-pulse diode-pumped lasers include femtosecond lasers with up to 900 fs pulse widths and picosecond lasers with up to 80 MHz repetition rates. Femtosecond Lasers - The ultrafast pulses delivered by femtosecond lasers enable the most demanding, high precision micro-structuring…

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…MHz, and pulse energy up to 200 µJ. Pulsed Q-Switched Pulsed Q-Switched A complete portfolio of Q-switched DPSS lasers is available at wavelengths in the infrared, visible, and ultraviolet, with a broad range of average powers and repetition rates ranging from 1 to 350 khz, with pulse energies…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

…efficient machining and throughput. Defined by the level of precision needed, laser solutions range from short pulse (nanoseconds) to ultrashort pulses (picoseconds). Ultrashort pulses minimize heat affected zones and, combined with “cold machining” processes, offer the highest level of precision…

Microelectronics

Microelectronics

pulse energy of the LAMBDA SX laser. This is an industrial-grade excimer laser which can deliver 1050 mJ at 308 nm, at a repetition rate of 300 Hz. The high pulse energy is used to pattern circuits up to 400 mm2 in area with a single laser pulse. And at 300 pulses per second, this “single pulse”

COHR AVIA NX UV DS 0117 5.pdf

COHR AVIA NX UV DS 0117 5.pdf

…NX AVIA NX
355-20 355-25 355-30
Fundamental Center Wavelength (nm) 354.7 354.7 354.7
Output Power and Energy 20W, 200 µJ at 100 kHz 25W, 250 µJ at 100 kHz 30W, 250 µJ at 120 kHz
Repetition Rate Single-shot to 250 kHz Single-shot to 300 kHz Single-shot to 300 kHz
Pulse Width

COHR AVIA LX UV DS 0818 3.pdf

COHR AVIA LX UV DS 0818 3.pdf

AVIA LX 355-20
Fundamental Center Wavelength (nm) 354.7
Output Power (W) (specified) >20 at 50 kHz
Output Power (W) (typical) >15 at 100 kHz
>10 at 150 kHz
>5 at 200 kHz
Pulse Energy (µJ) Up to 400
Repetition Rate Single-shot to 300 kHz
Pulse Width

COHR AVIA NX Green DS 0818 3.pdf

COHR AVIA NX Green DS 0818 3.pdf

AVIA NX Datasheet
SPECIFICATIONS1 AVIA NX 532-36 AVIA NX 532-45
Fundamental Center Wavelength (nm) 532 532
Output Power and Energy 36 W, 327 µJ at 110 kHz 45 W, 346 µJ at 130 kHz
Repetition Rate Single-shot to 300 kHz Single-shot to 300 kHz
Pulse Width (ns) <33 up to 110…

GUI 3.88 Revision History.pdf

GUI 3.88 Revision History.pdf

…problem in the Monaco GUI where the pulse width control would not be visible
HyperNX:#588 - Change AOM2 Width parameter in Triggering Tab dependent on firmware
version
HyperNX:#589 - Frequencies in LRRB window should be sorted by value
AVIA LX:#281 - Moved THMT control to the…

USP Lasers Semiconductor Packaging Whitepaper.pdf

USP Lasers Semiconductor Packaging Whitepaper.pdf

…features in this context are pulse gating, continuous energy control of
individual pulses, and the ability to alter repetition rate on the fly. These are necessary to support a
high degree of synchronization between the scanner, motion stage, and the laser pulses, enabling
optimum…

Whitepaper - USP Lasers Deliver Cleaner Cuts for Semiconductor Packaging.pdf

Whitepaper - USP Lasers Deliver Cleaner Cuts for Semiconductor Packaging.pdf

…features in this context are pulse gating, continuous energy control of
individual pulses, and the ability to alter repetition rate on the fly. These are necessary to support a
high degree of synchronization between the scanner, motion stage, and the laser pulses, enabling
optimum…

Untitled-2

Untitled-2

…in this context are pulse
gating, continuous energy control of individual pulses,
and the ability to alter repetition rate on the fly. These are
necessary to support a high degree of synchronisation
between the scanner, motion stage, and the laser pulses,
enabling optimum…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions